1) cot mandrel
胶辊芯轴
2) cot bearing
胶辊轴承
1.
Expatiation and analysis is done to the energy economy and environment firendly tex-accessories of high quality developed and self-innovated in the past 30 years since the execution of reform and open-up policy,including cots,aprons,cot bearings,top apron cradles,bottom apron cradle and press bars both in the front and the rear areas.
阐述和分析了我国改革开放30年中研究和自主创新的一大批"节能型、环保型、创新型"的优质纺纱器材,包括胶辊、胶圈、胶辊轴承、上销、下销及前后区压力棒等,指出这些新型纺纱器材的研发不仅丰富和发展了棉纺牵伸理论,填补了国内同类产品的空白,还大幅度地提高了成纱质量的整体水平和档次。
3) radial grooved roller
轴向槽纹胶辊
4) mandrel
[英]['mændrəl] [美]['mændrəl]
芯辊
1.
Stress and its Effect on Service Life of Mandrel for Cold Ring Rolling;
冷辗扩芯辊受力及对其寿命影响分析
2.
According to the character and the principle of fatigue fracture,heat treatment experiment tests with different parameters are carried out for the cold rolling mandrel made of steel W6Mo5Cr4V2.
针对W6M05Cr4V2钢冷辗芯辊疲劳断裂的特点和机理,进行了不同参数下的热处理试验,结果表明,中温淬火(1 150℃)+多次高温回火(550℃)能有效改善W6Mo5Cr4V2钢的显微组织,使其达到更优的强韧性配合,提高抗疲劳断裂性能。
5) roller
[英]['rəʊlə(r)] [美]['rolɚ]
轴辊
1.
Load analyse of rollers in sheet-scroller and the radius of sheet;
卷板机轴辊的受载分析及板材曲率半径的确定
6) cot
[英][kɔt] [美][kɑt]
胶辊
1.
Comparative analysis of the the application of the cot telescoped with the standing telescoping machine FP-2 and the horizental telescoping machine shows that the standing telescoping machine is superior in compact structure,easy operation,wide application and strong practicability,thus in conformity with varieties of requirement of the cots in assembling and disassembling operation.
通过对FP-2型立式套胶辊机的使用并与A808型卧式套胶辊机套制的胶辊纺纱质量进行分析,说明立式套胶辊机具有结构紧凑、操作简便、适用范围广、实用性强等特点,能满足对各种胶辊的装拆要求,纺纱质量水平也比A808型套制的胶辊高,提高了纺纱质量,值得推广使用。
2.
Exploration is done to the relationship of cot structure,cot rigidity to evenness of the resultant yarn and yarn strength;relationship of cot rigidity to friction factor and linear width of nipper jaws;relationship of cot diameter and telescoping tolerance to quality of resultant yarn.
阐述了胶辊结构、硬度与成纱条干、强力的关系,胶辊硬度与摩擦因数、钳口线宽度的关系;胶辊直径、套差与成纱质量的关系;分析了低硬度胶辊改善成纱条干的机理,指出胶辊制作中必须注意的问题及纺纱工艺配置。
3.
Sampling the common problems in spinning process,spinnning performance of the cot and apron should be in conformity with the draft philosophy and develops in direction of cotton spinning technique.
举例说明纺纱应用技术中存在的问题,强调胶辊、胶圈的纺纱性能应遵循牵伸原理,其应用技术应符合棉纺工程技术的发展方向。
补充资料：纺纱牵伸胶辊胶管
分子式：
CAS号：
性质：又称纺纱皮辊胶管。用于棉纺、化纤纺、棉及化纤混纺等纺纱机的牵伸。为中空管状纯橡胶制品。经混炼、挤出、成型、硫化等工序加工制成。分并条胶辊胶管、精梳胶辊胶管、粗纱胶辊胶管及细纱胶辊胶管。产品具有高硬度(邵尔A80度)、良好的动态性能、耐磨性和抗静电性。
CAS号：
性质：又称纺纱皮辊胶管。用于棉纺、化纤纺、棉及化纤混纺等纺纱机的牵伸。为中空管状纯橡胶制品。经混炼、挤出、成型、硫化等工序加工制成。分并条胶辊胶管、精梳胶辊胶管、粗纱胶辊胶管及细纱胶辊胶管。产品具有高硬度(邵尔A80度)、良好的动态性能、耐磨性和抗静电性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条