1) Infrared remote control
红外遥控
1.
Design of rise-and-fall sickbed based on infrared remote control;
红外遥控式可升降医疗病床的设计
2.
An Economic and Practical Intelligent Module for Infrared Remote Control;
一种经济实用的智能红外遥控模块
2) Infrared Remote-control
红外遥控
1.
Encoding and Decoding Method for Infrared Remote-control Signal;
红外遥控信号的一种编码解码方法
2.
Research and design of an infrared remote-control general self-learning set;
学习型红外遥控装置的研究与设计
3.
A method of sending and receiving infrared remote-control signal with microchip computer;
采用单片机发送并接收红外遥控信号的方法
3) infrared remote
红外遥控
1.
The paper designed a kind of Electronic-acupression instrument based on STC12C5052AD microcomputer,which is controlled by infrared remote.
本文设计了一种利用STC12C5052AD实现红外遥控的电针仪,介绍了该电针仪的工作原理、STC12C5052AD芯片的特征,以及利用该芯片实现电针功能的硬件电路基本构成,同时给出了实现系统功能的软件流程。
2.
The intelligent table tennis serve machine was designed,which was controlled by infrared remote device.
研究设计了一种由红外遥控器控制的智能型乒乓球发球机,并对该发球机装置进行了软、硬件设计。
3.
My article primary introduce the system of infrared remote keyboard and the realization of this system.
在介绍红外遥控器原理的前提下,深入研究了PS2键盘鼠标协议的工作原理和实现过程。
4) Infrared remote control
红外线遥控
1.
Based on MC9S12H256, an infrared remote control system of motor is given.
介绍了一种基于MC9S12H2 5 6的红外线遥控电机控制系统 ,阐述了其硬件组成、软件设计、译码和速度控制原理。
2.
The characteristics of infrared remote control chips BA5048,BA5050 are introduced;A interface electric circuit was gaved to MCS 51 single chip microcomputer system;A compile language subprogram was gaved for identify key code.
介绍了红外线遥控发射器ＢＡ５０４８和接受器ＢＡ５０５０芯片的特性及其与ＭＣＳ－５１系列单片机系统的接口电路，并给出了软件识别键码的方法和汇编子程
3.
This paper presents the composition of hardwares and flow chart of program as well as key producing technology of coding logic analyzer about infrared remote controller.
介绍红外线遥控编码逻辑分析仪的硬件组成、软件流程和设计制作的关键技术。
5) infrared remote controller
红外遥控器
1.
The coding and the transmitting mode of all the kinds of infrared remote controller are summarized and analyzed.
总结分析了各种红外遥控器的编码和编码发送方式。
2.
In order to simplify the testing process,and make the detection process more intuitive,an intelligent detection system of the infrared remote controller based on C8051F020 is designed.
为简化红外遥控器的检测过程,并使检测过程更加直观,以C8051F020单片机为核心设计了红外遥控器智能检测系统。
3.
This paper introduces design of intelligent-learning infrared remote controller based on MSP430 microcontroller, and describes hardware structure and software of system.
介绍了一款基于MSP430系列单片机的智能学习型红外遥控器的设计方案,给出了该系统的硬件结构和软件组成。
6) infrared ray remote control
红外线遥控
1.
It is designed to have a ring-like structure with empity centre and can be adjusted with rolling-car weights, and operated in infrared ray remote control manner.
平衡头采用中空式环形结构,滚动小车式配重和红外线遥控工作方式。
2.
This article firstly analyzes the infrared ray remote control signal code, and then introduces the using of infrared ray remote control in single chip computer system.
在分析红外线遥控器信号码的基础上,将红外线遥控技术应用到单片机系统中——发射器发出红外线指令,使用软件方式实现红外线遥控器的解调。
3.
The infrared ray remote control system for interior electrical equipment is designed.
文章在分析了红外线遥控信号编码的基础上,选择HS6221红外遥控编码芯片构建红外线发射系统,EM78P153S单片机和一体化红外接收头FM-6038TM构建红外线接收系统,设计一种适合于室内电器控制的红外线遥控系统。
补充资料：闭环遥控系统
控制端与被控端之间有双向信息流传输的遥控系统（见图）。闭环遥控系统的主要特点是利用遥测系统或目视系统作为自动控制回路中的反馈环节。遥控指令的形式与控制质量有密切关系。在进行遥控时，控制端发出遥控指令后，由遥测系统测量被控对象的状态参量值，取得遥控指令执行效果的反馈信息，并将其与期望值比较，如有差异就发出对应于误差信号的新的遥控指令，继续进行测量、比较和控制，直到被控对象的状态参量值与其期望值相一致，才停止发出遥控指令。用目视方式控制航空模型飞机的航向，坦克上配备的战术导弹的光学瞄准系统等，都是目视系统的例子。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条