1) full-vulcanized powder nitrile rubber
全硫化粉末丁腈橡胶
1.
Mechanical properties,rheological behavior and morphology of rigid polyvinyl chloride / full-vulcanized powder nitrile rubber blends were studied.
研究了纳米级全硫化粉末丁腈橡胶(VP-401)对硬质聚氯乙烯(PVC-U)增韧改性材料的力学性能、流变性能及形态结构的影响。
2) ultra-fine full-vulcanized acrylonitrile-butadiene powdery rubber
超细全硫化粉末丁腈橡胶
1.
Morphology and properties of ultra-fine full-vulcanized acrylonitrile-butadiene powdery rubber/epichlorohydrin rubber blends
超细全硫化粉末丁腈橡胶/二元共聚氯醚橡胶共混物的结构与性能
3) fully vulcanized powder rubber
全硫化粉末橡胶
1.
Based on the research results of morphology control for rubber phase in rubber plastics blending,the nano grade fully vulcanized powder rubbers whose particle size and distribution are controllable can be dispersed easily in plastics.
该方法从橡塑共混中橡胶相形态调控的理论研究结果出发 ,研制出的粒径及其分布可控的纳米级全硫化粉末橡胶 ,它极易在塑料中分散 ,与不同塑料共混后可制成橡胶相形态可控的各种增韧塑料和全硫化热塑性弹性
4) powdered nitrile rubber
粉末丁腈橡胶
1.
Aging properties of powdered nitrile rubber filled with high abrasion furnace black;
高耐磨炉黑填充型粉末丁腈橡胶硫化胶的老化性能
2.
Preparation and properties of high abrasion fine furnace black filled powdered nitrile rubber;
高耐磨炉黑填充粉末丁腈橡胶的制备及性能
5) PNBR
粉末丁腈橡胶
1.
Application of PNBR and Elvaloy in soft PVC;
粉末丁腈橡胶和Elvaloy在软质PVC中的应用
2.
A PVC/PNBR TPE was prepared based on PVC and powdered NBR(PNBR) using magnesium hydroxide(MH) as flame retardant,and the influence of the flame-retardant synergists,such as diantimony trioxide(Sb_2O_3),zinc borate(ZB),ammonium heptomolybdate(AOM),zinc oxide(ZnO) and manganese dioxide(MnO_2) on the properties of above TPE was investigated.
以PVC和粉末丁腈橡胶(PNBR)为主体材料,氢氧化镁为阻燃剂,制备PVC/PNBR共混型热塑性弹性体,研究阻燃协效剂三氧化二锑、硼酸锌、七钼酸铵、氧化锌和二氧化锰对弹性体性能的影响。
3.
The effect of compound curing agents of phenol-formaldehyde resin and SnCl 2·2H 2O on the mechanical properties of the powder nitrile-butadiene rubber (PNBR)/polyvinyl chloride of high degree of polymerization(HPVC) thermoplastic elastomers was investigated by even designed method.
运用均匀设计方法考察了酚醛树脂和氯化亚锡复合硫化剂对粉末丁腈橡胶 (PNBR) /高聚合度聚氯乙烯(HPVC)热塑性弹性体力学性能的影响。
6) powdered acrylonitrile-butadiene rubber
粉末丁腈橡胶
1.
Industrial test of powdered acrylonitrile-butadiene rubber DN 214;
粉末丁腈橡胶DN214的工业试验
2.
Based upon the reviews related to the raw materials, productive methods, applying development of powdered acrylonitrile-butadiene rubber, the importance and essentiality of exploitation and production of a new modified pre-crosslinking PDN214 were pointed out in this thesis.
在对粉末丁腈橡胶生产用原材料、生产方法、生产工艺及应用进展综合分析的基础上，针对市场需求，提出了一种用于材料改性且部分交联的新型粉末丁腈橡胶PDN214的开发和工业化生产研究选题。
补充资料：丁腈橡胶胶粘剂
分子式：
分子量：
CAS号：
性质：一类合成橡胶型粘剂。由于腈橡胶与硫化剂、增塑剂、补强剂混炼后，溶解于乙酸乙酯、乙酸丁酯等溶剂中制得的浓度在15%~30%的胶粘剂胶液。具有耐油性、一定耐热性和极性高等优点，缺点是初粘性差、硫化时间长，因而应用受到一定限制。主要用于橡胶、金属、塑料和织物的粘结。为了提高粘结性能，常用酚醛树脂或环氧树脂进行改性，见酚醛-橡胶胶粘剂。
分子量：
CAS号：
性质：一类合成橡胶型粘剂。由于腈橡胶与硫化剂、增塑剂、补强剂混炼后，溶解于乙酸乙酯、乙酸丁酯等溶剂中制得的浓度在15%~30%的胶粘剂胶液。具有耐油性、一定耐热性和极性高等优点，缺点是初粘性差、硫化时间长，因而应用受到一定限制。主要用于橡胶、金属、塑料和织物的粘结。为了提高粘结性能，常用酚醛树脂或环氧树脂进行改性，见酚醛-橡胶胶粘剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条