说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 台阶面
1)  stepped surface
台阶面
1.
The O-Ru low index surface systems and the Ru (1120) , (1121) stepped surface ones were studied by means of the 5-parameter Morse potential theory.
利用原子与表面簇合物相互作用的5参数Morse势方法(简称5-MP)系统地研究了O-Ru低指数面及Ru(1120),(1121)台阶面体系,获得了吸附几何、结合能、振动频率等临界点特性,所得相关数据与实验结果非常吻合。
2.
The main contents of this work are as follows:The adsorption of H atoms on Ni(111) subsurface,Ni(211) and Ni(533) stepped surfaces were investigated by using the 5-parameter Morse potential(5-MP) of interaction between an atom and a metal surface cluster.
应用原子与表面簇合物相互作用的五参数Morse势(5-MP)方法对氢原子在Ni(111)表面和次表面以及Ni(211)、(533)台阶面进行了系统研究,得到了氢原子在上述各面的吸附位、吸附几何、结合能和本征振动频率。
3.
The adsorption of H atoms on Ni(111) subsurface, Ni(211) and Ni(533) stepped surfaces was investigated by using the 5-parameter Morse potential (5-MP) of interaction between an adatom and a metal surface cluster.
应用原子与表面簇合物相互作用的五参数Morse势(5-MP)方法对氢原子在Ni(111)表面和次表面以及Ni(211),(533)台阶面进行了系统研究,得到了氢原子在上述各面的吸附位、吸附几何、结合能和本征振动频率。
2)  step surface
台阶面
1.
This paper is based on CAXA automatic programming software,By taking the processing of Pump lid curve step surface as the example,We analyze and study the plane outline processing method,the parametric processing method, the planar region processing method and the automatic region processing method,finally proposed the preferred plan for these step surface NC machining.
本文以CAXA自动编程软件为基础,以泵盖曲线台阶面加工为例,研究平面轮廓加工法、参数线加工法、平面区域加工法和自动区域加工法,提出了该类台阶面数控加工的最佳方案。
2.
The dissociative adsorption properties for H2 on Pd(510) step surface show the role of the step is that the direct nonactivated dissociative pathes are formed under the step, the nonactiv.
对氢分子在Pd(510)台阶面上的解离吸附行为的研究表明,由于台阶的影响,在台阶下形成了非活化直接解离通道,在台阶上及台阶边棱处,主要存在非活化前驱态解离通道;在台阶面上发现了氢分子的活化吸附。
3)  incline bench
斜面台阶
1.
Based on comprehensiveness analysis and calculation on data from blasting experiments including blasting crater, incline bench, different distance of hole,initiation in multi-row and same stage, optimization of blasting parameters such as distance of hole bottom, minimum burden, explosive consumption an unit etc.
通过爆破漏斗、斜面台阶、不等孔距爆破试验以及多排同段起爆试验,在综合统计并分析计算各种试验数据的基础上,对鸡冠嘴金铜矿的中深孔凿岩爆破孔底距、最小抵抗线、单位炸药消耗量等参数进行了优化,并在实际生产中推广应用,取得了较好的技术经济效果。
4)  sidestep section
台阶断面
5)  stage interface
台阶界面
1.
The stage interface in casting SiC_p/Al composites;
铸态SiC_p/Al基复合材料中的台阶界面
6)  stepped spillway
台阶坝面
1.
Experimental study on united dissipator with stepped spillway dam surface and flaring gate piers;
宽尾墩与台阶坝面联合消能工的试验探索
补充资料:台阶坡面角


台阶坡面角
angle of bench slope

ta.j.e POmI0njlao台阶坡面角(angle of beneh slope)台阶坡面与水平面的夹角(见台阶)。其值与矿岩性质、岩层的倾角、倾向、构造、穿孔爆破方法和台阶存在时间等因素有关。台阶坡面角又分工作台阶坡面角和最终台阶坡面角。后者小于前者。台阶坡面角对工作帮坡角和最终边坡角有一定影响。中国金属矿山的台阶坡面角一般为65。一70。。 (蔡鸿起)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条