1) joint surface
结合面
1.
Waterproof construction technology of the joint surface between tower crane base and basement base
塔吊基座与地下室基础结合面防水施工技术
2.
Fully according to contact characteristics of machine joint surfaces, using methods of 3D - contact unit and spring - damping unit to established finite element model in joint surface, then identification parameter of contact stiffness and damping in joint surface with optimization.
该文充分考虑机械结合面的接触特性,提出了利用三维接触单元和弹簧-阻尼单元相结合的方法建立结合面的有限元模型,再应用优化参数法对结合面的接触刚度和阻尼等参数进行识别。
3.
The joint surface parameters of a radial drilling machine model have been identified by means of themethod of reference [fi,which carries out the identification using the imaginary part equations of the orthogonalityrelation equations.
采用文献［１］提出的基于正交关系方程的虚部方程识别机械结构结合面动力学参数的方法，识别出摇臂钻床模型的结合面参数。
2) Joint
[英][dʒɔɪnt] [美][dʒɔɪnt]
结合面
1.
Calculation of Temperature Field Including Joint Problem;
含有结合面问题的温度场计算
2.
Analysis of Dynamic and Thermal Characteristics of Fixed Joint in Machine Tool;
机床固定结合面动态与热态特性分析
3.
Joint Identificationon Experiment of Numeric Control Machine and Dynamic Optimization of Its Main Structure;
数控机床结合面参数实验识别及其主结构动态优化
3) interface
[英]['ɪntəfeɪs] [美]['ɪntɚ'fes]
结合面
1.
The user self-defining element is introduced into simulating the interface between two modules of the machining center and the data in Ref[3] is applied to determining the stiffness of the user self-defining element.
采用ANSYS软件对加工中心振动模态进行有限元分析,在有限元模型中采用了用户自定义单元来模拟结合面的刚度,同时将文献[3]的结合面刚度计算方法推广应用于确定自定义单元的刚度值。
2.
The micro-morphology of the interface,diffusion depths and composition as well as their micro-hardness were observed and determined.
对HIP后的试样分别进行结合面微观观察、扩散层厚度、成分及其显微硬度的测试分析。
3.
With the application of new material and new technique to the practice of structure repair by enlarging section method, the technique of embedded steel bar in the interface of new and old concrete is used more and more popularly.
随着新材料、新技术的应用，采用增大截面法对结构进行维修加固时，植筋技术越来越多地应用在新老混凝土结合面上。
4) bonding interface
结合面
1.
Experimental research on shear of bonding interface between young and old concrete influenced by constructional reinforcement
构造钢筋影响下新老混凝土结合面抗剪试验研究
2.
The peeling strength increases with annealing temperature because of the diffusion of atoms across through the bonding interface and the formation of grain boundaries from recrystallization.
对轧制复合的Ag Cu双金属薄板采用不同温度的退火处理 ,研究了结合面分离强度随退火温度变化的规律 ,讨论了影响分离强度的因素。
5) joint face
结合面
1.
2 turbine and joint face deformation of casing in one power plant were discussed.
对某发电厂2号汽轮机汽缸内壁裂纹及缸体结合面变形缺陷的焊接修复方案及其存在问题进行了探讨,并在现场实施了焊接修复。
2.
The key to establish a precise dynamic model with Finite Element Method is the simulation of the dynamic characteristics of the joint face in the machine tool.
而建立机床结构精确的动力学有限元模型的关键是对机床机构中结合面的动力学描述。
6) interfacial bonding
界面结合
1.
The reason is believed to be the improved interfacial bonding.
研究表明，在碳化硅复合材料表面化学镀一层镍，能够较好地改善增强体与基体的界面结合，使得碳化硅复合材料的抗弯强度、冲击韧性及宏观硬度均有了明显的提高。
2.
The fracture surface of the wires studied by scanning electron microscopy (SEM) shows a suitable interfacial bonding between the fiber and aluminum.
复合丝拉伸断口的扫描电镜（ＳＥＭ） 观察可见断面有一定起伏，部分纤维拔出但长度较短，表明纤维与基体具有适当的界面结合。
3.
Al/Diamond composites were fabricated by Spark Plasma Sintering(SPS) under Solid-phase sintering,changes of interfacial bonding during sintering process were investigated mainly.
使用放电等离子烧结(SPS)固相烧结条件下制备Al/Diamond复合材料,重点研究烧结过程中基体与增强体两相界面结合状态随烧结时间的变化规律。
补充资料：非结合环与非结合代数
非结合环与非结合代数
on-associative rings and algebras
非结合环与非结合代数【珊心胭仪妇柱视血娜.d alge-b旧s;。eaceo””姗.oe.二、双a.幼。6P。」 具有两个二元运算+与，，除了可能不满足乘法结合律外，满足结合环与代数(a洛。clati记nn邵and目罗b璐)之所有公理的集合.非结合环与代数的第一批例子出现在19世纪中叶，是不结合的(Ca外呀数(c盯触yn山n1比IS)和更一般的超复数(h”姆rComp恤nUmber)).给定一个结合环(代数)，如果用运算〔a，bl二ab一ba代替原有的乘法，其结果是一个非结合环(代数)，这是个Lie环(代数).另一类重要的非结合环(代数)是Jo攻lan环(代数)，它们可由在特征非2的域(或有1和1/2的交换的算子环)上的结合代数中定义运算a·b=(ab+ba)/2得到.非结合环与代数的理论已经发展成代数学的一个独立分支，展现出与数学的其它领域以及物理学、力学、生物学及其他学科的许多联系.这个理论的中心部分是熟知的拟结合环和代数(n比ly一别粥戊泊石wn刀乡缸记a】罗bras)的理论，它们有:Lie环和珠代数，交错环和交错代数，北攻坛幻环与Joltlan代数，MaJ几哪B环和Ma月五U口B代数，以及它们的某些推广(见Ue代数(Lieal罗bra);交错环与代数(司加叮必tiverm邵alld目罗b挑);J加止川代数(Jo攻协nal罗bIa);M幼城e。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条