1) low chromium vanadium titanium cast iron
低铬钒钛铸铁
1.
Using the unique vanadium titanium resources superiority develops the low chromium vanadium titanium cast iron by iron mold.
利用承德钢铁集团公司特有的钒钛资源优势,开发了低铬钒钛铸铁铁型,其高温下的力学性能大为增强,抗熔蚀、抗激冷激热、抗氧化生长性能显著提高,使用寿命远优于同行业同类产品。
2) VTi cast iron
钒钛铸铁
1.
Laser strengthening process and structure characteristics of VTi cast iron cylinder liners in diesel engine are discussed in this paper.
论述了钒钛铸铁柴油机缸套激光强化的工艺与组织特征。
3) low titanium ferrochromium
低钛铬铁
4) low-Cr cast iron
低铬铸铁
1.
The WC and low-Cr cast iron composite layer samples were prepared by casting-penetrating process to improve the wear resistance of the low-Cr cast iron.
为进一步提高低铬铸铁的耐磨性,利用铸渗工艺采用膏块法制备了WC/低铬铸铁复合铸渗层试样。
2.
VS+Ti+Zn compound inoculant plays a favorable role in improving property process of low-Cr cast iron.
在低铬铸铁改性处理中,VS+Ti+Zn复合孕育剂起着良好的孕育处理作用。
5) Low chromium cast iron
低铬铸铁
1.
Worn morphology of low chromium cast iron grinding balls used in wet mill in Dexing copper mine was analyzed with SEM(scanning electrical microscope).
低铬铸铁磨球存在切削、凿削、冲击坑及腐蚀坑等多种磨损形貌 ,观察分析后可知 ,欲进一步降低耗球量 ,不仅要提高磨球的硬度 ,而且要提高磨球材质的耐蚀
2.
In this paper the structure of low chromium cast iron (CrO2) on cast condition has been researched The results show that the structure is composed of eutectic carbide Fe 3C,(Cr,Fe) 7C 3 and sorbite The type of carbide is not changed but high hardness can be acquired by heat treatmen
研究了ＣｒＯ２低铬铸铁的铸态组织结构，结果指出，铸态组织为Ｆｅ３Ｃ、Ｃｒ７Ｃ３型共晶碳化物＋索氏体基体组成。
3.
The wear resistance of low chromium cast iron with the addition of 0.
结果表明：由于钒、铁合金元素在低铬铸铁中的有益作用，使其硬度、韧性与耐磨性均比不加钒、钛的高。
6) Nicrosilal
镍铬钛铸铁
补充资料：钛13钒11铬3铝合金
分子式：
CAS号：
性质：β钛合金。成分为钒13％，铬11％，铝3％，余量钛。退火后室温机械性能：抗拉强度862MPa，屈服强度827MPa，延伸率10％，弹性模量10.34×104MPa，HRC硬度32～36。采用真空自耗电弧炉熔炼制取。制造紧固件和较大面积的模锻件。
CAS号：
性质：β钛合金。成分为钒13％，铬11％，铝3％，余量钛。退火后室温机械性能：抗拉强度862MPa，屈服强度827MPa，延伸率10％，弹性模量10.34×104MPa，HRC硬度32～36。采用真空自耗电弧炉熔炼制取。制造紧固件和较大面积的模锻件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条