1) wet chemistry
湿化学
1.
Characterization, structure and performances of LiMn_2O_4 synthesized by mechanically activated-wet chemistry;
机械活化-湿化学合成LiMn_2O_4的组成、结构与表征
2.
The synthetic mechanism for LiMn_2O_4 by mechanically activated-wet chemistry method;
LiMn_2O_4的机械活化湿化学合成机理
3.
In this review,the developing progress of "wet chemistry" used in attaching organic molecules onto silicon surface and some technologies are presented in details.
本文着重介绍了用“湿化学(wet chemistry)”方法在单晶硅表面嫁接有机分子的发展历程和最新研究进展,并探讨了在硅表面接枝有机分子后的一些研究结果及其未来的发展趋势。
2) wet-chemical
湿化学
1.
ZrV_2O_7 with negative-thermal-expansion(NTE)was prepared by calcined-synthesis combined with wet-chemical process.
利用湿化学法制备先驱体-煅烧合成制备钒酸锆-ZrV2O7的新技术,采用粉末冶金方法,研究了ZrV2O7与金属Al两类不同材料的复合行为及其热膨胀特性。
3) wet chemical methods
湿化学法
1.
Research progress in preparation of quasi one-dimensional nanosized materials by wet chemical methods;
湿化学法制备准一维纳米材料的研究进展
2.
Comparing with the conventional ones,WO3 nano-powder prepared by wet chemical methods is thinner and more on the control of distribution of grain degree,and it’s with good uniformity and dispersivity.
综述了目前国内外湿化学法制备纳米WO3粉体的主要方法:水解法、沉淀法、溶胶-凝胶法、水热合成法及微乳液法,并对各种制备方法的优缺点进行了简要的讨论。
4) Wet-end chemistry
湿部化学
1.
This paper describes the fundamentals of the wet-end chemistry and the development of wet chemicals used in the paper-making.
随着现代造纸工业中高速纸机、双网成形、封闭白水系统、废纸利用和中性造纸等新技术的发展,造纸湿部化学领域的研究与应用取得了令人瞩目的进展。
2.
In this paper, the importance and development of wet-end chemistry and wet-end additives in paper industry are reviewed.
本文介绍了湿部化学和湿部化学助剂在造纸工业中的重要作用及其进展，以及国内外化学助剂的应用现状和前
3.
The wet-end chemistry affecting sizing effect, such as sizing sequence, charge of alum, cationic starch and rosin emulsion size was studied in this paper.
对分散松香胶施胶过程中的湿部化学进行了初步的探讨，研究了硫酸铝、分散松香胶、阳离子淀粉等的用量以及施胶顺序对脑胶效果的影响。
5) wet end chemistry
湿部化学
1.
To optimize the wet end chemistry of paper machine for clean production ——The application of particulate retention and drainage system in high speed newsprint machine;
优化纸机湿部化学 实施清洁生产 微粒助留助滤体系在高速新闻纸机上的应用
2.
Special topic lectures on paper chemicals and wet end chemistry:Chapter 3.Rosin sizing Chemistry;
造纸助剂与湿部化学专题讲座(三) 松香施胶过程中的湿部化学
3.
A study on papermaking with re-claimed water and its wet end chemistry characteristics;
中水造纸及其湿部化学特性的研究
6) wet chemical method
湿化学法
1.
Synthesis and performance of chromium-doped spinel lithium manganese oxide prepared by wet chemical method;
掺铬锂锰氧化物的湿化学法合成与性能
2.
The optically variable pigments were produced by wet chemical method,and mica titanium having interference colors acted as host materials.
采用具有干涉色的云母钛作为基质材料,通过湿化学法制备随角异色功能颜料。
3.
4))O_3 porcelain powder is prepared by wet chemical method and it is characterized by X-ray Diffraction(XRD),infrared( IR),transmission electronic microscope(TEM).
针对微波介质瓷料系统成瓷过程中介电损耗较大且成瓷温度较高的问题,采用湿化学法制备(Ag0。
补充资料：湿基湿含量
分子式：
CAS号：
性质：为了表示湿物料的含湿（水）量，常以单位质量湿物料为基准表示所含湿分（水分）的质量，称为湿基湿含量。参见湿含量条目。
CAS号：
性质：为了表示湿物料的含湿（水）量，常以单位质量湿物料为基准表示所含湿分（水分）的质量，称为湿基湿含量。参见湿含量条目。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条