1) copper zinc alloy
铜锌合金件
1.
The experimental results show that the water-based coating is applied to lost foam casting of the carbon steel and copper zinc alloy, and has lower lost, higher practicability and better.
试验表明,该涂料可用于消失模铸造铜锌合金件、碳钢件,而且成本低廉,实用性强,具有良好的推广价值。
2) Cu-Zn alloy
铜锌合金
1.
It is reviewed that iron is used in industry wastewater treatment and Cu-Zn alloy is used in drinking water treatment,slightly polluted water treatment and pretreatment systems of rev.
本文综述了铁在工业废水中的应用现状以及铜锌合金在饮用水、微污染原水和反渗透、离子交换树脂预处理系统中的应用现状,并探讨了这些技术存在的优缺点和未来的发展方向。
2.
The theory of solid physics was introduced into the analysis about the effects of oxidative condition and alloy composition on the color of Cu-Zn alloy systems.
用分光光度计测定铜锌合金表面对不同波长光波的反射率,根据光谱波长及范围与颜色的关系给出了不同反射区域所对应的铜锌合金表面颜色,结合能带理论分析了加热时间、加热温度及合金成分对合金颜色的影响。
3.
The chemical composition, melting and moulding technics, as well as properties of Cu-Zn alloys for water treatment of boiler were studied in this work.
本工作研究锅炉水处理用铜锌合金的化学成分、熔炼方法、成型工艺及性能。
3) copper-zinc alloy
铜锌合金
1.
Cyanide-free copper-zinc alloy electroplating process for imitation gold;
无氰铜锌合金仿金电镀工艺
2.
A method for determination of 13 trace elements including Mg, Al, Ti, Cr, Mn, Ni, Cd, In, Sn, Sb, Tl, Pb and Bi in copper-zinc alloy by ICP-MS is described.
研究了应用电感耦合等离子体质谱法 (ICP MS)测定铜锌合金中Mg ,Al,Ti,Cr ,Mn ,Ni,Cd ,In ,Sn ,Sb ,Tl,Pb ,Bi共13种痕量元素的分析方法。
3.
The late-model copper-zinc alloy and mineral functional chinaware material were used to prepare an activated bed for water treatment of boiler .
本工作应用新型铜锌合金和功能矿物陶瓷材料制备锅炉水处理活化床,实现水垢晶体结构的微观调控,抑制锅炉硬垢的形成;建立锅炉水垢晶体生长动力学模型,探索锅炉水处理用活化床的节能与环保性能评价方法。
4) zinc-copper alloy
锌铜合金
5) yellow brass flakes
铜锌合金粉
1.
Research on increasing brightness of yellow brass flakes;
提高铜锌合金粉光泽度的研究
2.
The brightness of yellow brass flakes is upgraded by control of suboxidization reaction of peroxide and yellow brass flakes.
利用氧化的方法 ,控制过氧化氢与铜锌合金粉发生氧化反应 ,达到提高铜锌合金粉亮度的目的。
6) Zn-Cu-Ti alloy
锌铜钛合金
1.
This thesis summarized the properties,usege and the application status in outside of Zn-Cu-Ti alloy,analysed the prospect of Zn-Cu-Ti alloy in home in the side of construction field,concluded that it would be used in construction field and the industry foreground would be good.
综述了锌铜钛合金的性质、用途和国外发展应用现状,重点从建筑应用的角度分析了锌铜钛合金在国内的应用前景,认为锌铜钛合金将率先在国内建筑领域打开应用市场,其产业前景令人乐观,并对合金产业作了讨论。
补充资料：金银铜锌合金
分子式：
CAS号：
性质： 金含银、铜和锌的四元合金，调整银和铜的比例，可改变合金的色泽，锌降低熔点和改善流动性。采用真空中频炉熔炼，铸锭经热锻开坯后冷加工成材。用于制作首饰、装饰品和钎料。
CAS号：
性质： 金含银、铜和锌的四元合金，调整银和铜的比例，可改变合金的色泽，锌降低熔点和改善流动性。采用真空中频炉熔炼，铸锭经热锻开坯后冷加工成材。用于制作首饰、装饰品和钎料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条