1) H13R hot-work die steel
H13R热作模具钢
1.
The issues of H13R hot-work die steel with higher hardness after forged have been analyzed and reserched in this article,it is found that the higher temperature differential in the heat treatment furnace is the main reason to cause the un-qualified hardness.
针对H13R热作模具钢锻后硬度偏高的问题进行了分析研究。
2) hot work die steel
热作模具钢
1.
Research and Application of High Strength Hot Work Die Steel in China;
我国高强度热作模具钢的研究和应用
2.
Exploitation of New-style Hot Work Die Steel 4Cr2MoWVNi and Its Applicable Studies of Cummins Connecting Rod Dies;
新型热作模具钢4Cr2MoWVNi的研制及其在康明斯连杆模具上的应用研究
3.
According to the service conditions of hot work die steels,six kinds of steels were designed based on uniform design method,as well as the heat treatment processes.
根据热作模具钢的服役条件,基于均匀设计试验方法,设计了6种不同成分的热作模具钢,同时设计了对应的热处理工艺。
3) hot die steel
热作模具钢
1.
Microstructure simulation in hot die steel after hot forging and simulation software design;
热作模具钢锻后组织模拟及软件设计
2.
Laser cladding Stellite X-40 Co-based alloy on hot die steel;
热作模具钢表面激光熔覆StelliteX-40钴基合金
3.
Research status and development trends of thermal fatigue property of hot die steels;
热作模具钢热疲劳性能的研究现状与发展趋势
4) hot-working die steel
热作模具钢
1.
Introduced the working conditions and hot spray-welding coat design of hot-working die steel, and designed the hot spray-welding process, at last analyzed hot spray-welding coat element and its performance.
介绍了热作模具钢的工作条件与热喷焊涂层设计,并对热喷焊工艺进行设计,最后通过对热喷焊层的成分及性能进行分析。
2.
The importance of the hot-working die steel in the production is pointed.
指出了热作模具钢在生产中的重要性,介绍了热作模具钢的影响因素及损坏形式,并列出了热作模具钢常用钢号、主要特性及用途。
3.
For this reason,the chromium content was decreased,the molybdnum and vanadium contents incrcased and the tungsten added in the hot-working die steel so as to improve on its overall property.
在高温、高压强条件下H13钢通常出现早期失效,而传统的3Cr2W8V钢却表现出韧性不足,为此通过降低Cr含量、提高Mo和V含量,添加W元素来改善热作模具钢的综合性能,设计出了SDH2钢。
补充资料：热作模具钢
分子式：
CAS号：
性质：制造热压、锤锻和压铸模具用的工具钢。这种钢应用一定的高温强度、耐磨性和韧性，另外它的热强性、抗疲劳性能和抗氧化性都要好，还应具有高的淬透性和较小的变形。一般采用含碳量在0.3%～0.5%范围内，并含有铬、锰、镍、硅等合金元素的工具钢作为热作模具钢。常用的热作模具钢有5CrMnMo，5CrNiMo，3CrW8V，6SiMnV等。
CAS号：
性质：制造热压、锤锻和压铸模具用的工具钢。这种钢应用一定的高温强度、耐磨性和韧性，另外它的热强性、抗疲劳性能和抗氧化性都要好，还应具有高的淬透性和较小的变形。一般采用含碳量在0.3%～0.5%范围内，并含有铬、锰、镍、硅等合金元素的工具钢作为热作模具钢。常用的热作模具钢有5CrMnMo，5CrNiMo，3CrW8V，6SiMnV等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条