1) FeS solid lubrication layer
FeS固体润滑层
1.
FeS solid lubrication layer was prepared on the ion nitrocarburized surface of CrMoCu alloy cast iron by means of low temperature ion sulphurizing.
采用低温离子渗硫技术在CrMoCu合金铸铁离子氮碳共渗表面制备FeS固体润滑层。
2) solid lubricant coating
固体润滑涂层
1.
With the development of surface engineering and coating technology,solid lubricant coatings have got a wide application in mechanical elements.
随着表面工程与涂层技术的发展,固体润滑涂层在机械零件上得到了广泛的应用,涂层材料与涂层工艺取得了很大的进展。
2.
Mist cooling combined with solid lubricant coating technique was used in machining.
采用喷雾冷却和固体润滑涂层两者复合的方法来进行切削加工,对切削温度和后刀面磨损量进行了测量,并用SEM和EDAX对刀具后刀面磨损形貌和成分进行分析。
3.
The composition of solid lubricant coating is researched on the surface of grouting tube in the purdah grouting.
研究了帷幕灌浆中注浆管表面的固体润滑涂层组成。
3) Layered solid lubricant
层状固体润滑剂
4) solid lubrication
固体润滑
1.
Application study on solid lubrication in a dry scroll vacuum pump;
涡旋真空泵中固体润滑技术的应用研究
2.
The nickel-based solid lubrication coatings containing nickel coated graphite were produced on the 45 steel substrate by high velocity oxygen fuel spraying.
用超音速火焰喷涂在45钢表面制备具有Ni包石墨的镍基固体润滑涂层。
3.
Four types of solid lubrication coatings containing MoS_2 were sprayed on the steel substrate by high velocity oxygen fuel(HVOF) spraying.
采用超音速火焰(HVOF)喷涂的方法在45钢表面制备四种含有MoS2的镍基固体润滑涂层,并研究了MoS2含量对涂层组织和性能的影响。
5) solid lubricating
固体润滑
1.
Compared with TiN/40CrNiMo, the hardness and solid lubricating effects for TiN/GT35 were more significant.
同TiN/40CrNiMo相比,TiN/GT35的硬度高和固体润滑效果显著,GT35是较为理想的基体材料。
2.
The surface of the copperized carbon fiber was analyzed by scanning electron microscopy(SEM)and X-ray diffraction(XRD),the friction and wear properties were studied by adding the prepared copperized carbon fiber to PTFE to form solid lubricating composite materials.
在镀铜碳纤维中加入PTFE制备固体润滑复合材料,并进行摩擦磨损实验。
6) solid lubricant
固体润滑
1.
Phosphate treatment has a great influence on bonded solid lubricant coating.
把氧化锌、磷酸、水按照不同比例配成磷化液,对金属表面进行不同参数(温度、时间)的磷化处理,并在其表面煮涂MoS2利用M-2摩擦磨损实验机测定不同磷化工艺下的MoS2涂层的磨擦学性能,确定了使MoS2固体润滑涂层摩擦性能达到最佳的磷化工艺参数,并讨论了磷化膜表面粗糙度对固体润滑涂层摩擦学性能的影响。
2.
Rheological behavior of a thermal resistant bismaleimide resin for solid lubricant composite was studied.
研究了一种可用于固体润滑的耐高温双马来酰亚胺树脂的流变特性,并根据双阿罗尼乌斯方程,建立了与实验数据较为相符的化学流变模型,同时对树脂粘度进行了预测。
3.
For the analysis technology of the contact problem for the friction pair with solid lubricant,the traditional differential method need to deal with the border iterative,and the computational process is time-consuming and difficult to balance.
固体润滑摩擦副接触问题数值分析的传统的微分法涉及边界迭代,计算过程冗长且不易收敛。
补充资料：润滑涂层(见润滑载体)
润滑涂层(见润滑载体)
lubrication coat
runhua tueeng润滑涂层(lubrieation coat)见润滑载体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条