说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 靶心距
1)  off-target distance
靶心距
2)  target distance
靶距
1.
According to the effect of the technological parameter of the surface of abraser waterjet polish part on machining aim,concerning its machining time,target distance,jet pressure,jet rake,abraser grain size,abraser density and flow quantity,related experiments are conducted in this paper by means of orthog-onal experiment.
针对磨料水射流抛光零件表面的工艺参数———加工时间、靶距、射流压力、喷射倾角、磨料粒度、磨料浓度、流量等对加工指标的影响,用正交试验方法,进行有关试验。
2.
Based on the laser energy density of the target, a lot of analysis in this paper show that it is unnecessary for laser weapons to use adaptive optics system when the target distance is less than a certain value.
本文以激光的上靶功率密度为标准 ,大量分析表明 :在一定的靶距范围内 ,激光发射系统不需要自适应光学系统进行波前校正。
3.
The influences of cutting fluid,including pouring position,target distance,flux and velocity of flow on machining and its change rules are revealed systematically,and a new approach of les.
针对传统的大量浇注式切削加工存在切削液浪费大、成本高、污染环境、危害工人健康等问题,采用切削试验与ANSYS软件仿真相结合的方法,研究了传统浇注式和MQL切削加工中切削液的作用效果,系统地揭示出切削液浇注方位、作用靶距、流量、流速等对加工效果的影响及其变化规律,探索了少切削液加工的新途径。
3)  stand-off distance
靶距
1.
In this article,a semi-empirical parametric model of high-pressured water-jet cutting depth with water-cement ratio,stand-off distance,treating times was established,using multiple nonlinear regression analysis of experimental results.
结合高压水射流技术处理砂浆试块表面的实验数据,采用多元非线性回归分析方法建立了砂浆水灰比、靶距、处理次数与处理深度关系的半经验模型,利用该模型可建立一个适用于更大参数范围和多种工程材料处理深度估算的实用模型。
2.
The influence of the working parameters such as stand-off distance, jet pressure,submerged depth, exposure time on the submerged cavitating jet is also con-sidered.
本文实验研究了喷嘴结构参数对射流性能的影响关系,分析了靶距、射流压力、冲蚀时间及淹没水深对淹没空化射流的影响关系,结合自由射流实验研究,对淹没空化射流及自由射流冲蚀性能作了全面比较,从冲蚀质量曲线图及比能曲线图两个方面揭示了淹没空化射流冲蚀性能的优越性。
3.
To solve the problems that the machining of 5-axis abrasive waterjets,put forward the methods of controlling stand-off distance and changing tube length by compensating tool length.
采用五坐标刀具长度补偿法控制五轴水切割靶距;刀具长度补偿值适应喷嘴长度调整。
4)  eye of target
靶心
1.
The Method of Approaching Eye of Target and Its Application in Evaluating Highway Network;
靶心贴近法及其在局域公路网评价中的应用
2.
According to the degree of approaching to eye of target,we can get an ordering preference of program.
文章给出了多指标评判问题的靶心贴近法。
3.
The maximum value of incidence function for single index is used to be the eye of target.
针对膨胀土胀缩等级分类问题,构造了一种新的区间关联函数,提出了"分类特征体现度越大,权重越大"的权重计算原理,给出了一种新的变权计算方法,将单指标关联函数的最大值作为其评价类的靶心坐标,根据样本与靶心的贴近度,对样本进行分类。
5)  frontal distance from target point
靶前距
6)  miss distance
脱靶距离
1.
A research work to miss distance of missile under infrared decoy influence is done.
脱靶距离是飞机生存力评估的重要数据,红外诱饵弹对红外制导导弹的干扰效果也可通过脱靶距离来衡量。
补充资料:靶心
1.靶子的中心。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条