1) bad resetting
复位不良
2) replacement
复位
1.
Solution of replacement in 8031 SCM;
8031单片机上电复位引出问题的解决
2.
Except this, the author stresses the differences between the Base Pressing Mould and the rest kinds of moulds, pointing out that the side taking-out and replacement of the curved pin are both driven by hydraulic press; there is an order of priority between the side taking-out and mandrilling, between the replacement of the taking out and the addition of material.
介绍了该底座压制模具的结构、特点和动作过程 ,指出了该压制模具和一般压制模具在结构上的不同之处 ,即弯销的侧抽芯和复位动作均由液压机顶出杆驱动 ,侧抽芯和顶出制件存在着先后关系 ,侧型芯复位和加料、压制也存在着先后关
3.
Although prosthetic replacement has clearly established a role in the treatme.
对于选择内固定治疗的患者来说,准确的复位,合理的内固定选择,以及正确的内固定手术的操作是其中的关键。
3) reset
复位
1.
The analysis of the reset error of moving iron minear motor;
动铁式直线电机复位误差分析
2.
The Halt and Reset of the Fire Detecting and Alarming System;
火灾探测报警系统的死机和复位
3.
Analysis of reset circuit for lag amplitude discriminating CPU;
迟滞鉴幅式CPU复位电路探源
4) Reposition
复位
1.
The application of the open reposition and internal fixation on jaw fracture;
开放复位及坚固内固定治疗颌面外伤骨折
2.
CASE REPORT In 35 cases of nasal bone fracture, the vaseline gaxe were presetted into the roof of nasal cavity and position of fracture before processes of reposition and then the reduction of nasal bone fracture was performed by hands.
［背景］寻找鼻骨骨折复位的有效方法。
3.
The mechanism of reposition and fixation of this apparatus was analysed.
术后经半年至 2年随访 ,全部病例后突畸形基本纠正 ,7例骨折脱位获得良好复位 ,合并脊髓损伤也有不同程度恢复。
5) Reduction
复位
1.
Analysis of the curative effect of anterior reduction and reconstruction in the surgical treatment for lower cervical spinal dislocation;
前路复位与重建手术治疗外伤性下颈椎小关节交锁
2.
The Application of B-type ultrasonic leading in the Reduction of Long Bone Fracture;
B超引导长骨骨折手法复位的临床应用
3.
Discussion on Reduction Methods of Monteggia Fracture;
孟氏骨折尺桡骨复位探讨
6) restoration
复位
1.
Contrastive Analysis of Spring-restoration Device and Concave-board Device by Rolling Sphere;
滚球加弹簧复位装置与带凹槽板复位装置的对比分析
2.
Restoration of the Nanjing 2 Fossil Hominid Calvarium:Morphology and Taxonomic Implications;
南京2号人类头骨化石的复位和形态
3.
Through the observation of crack,settlement,displacement,etc in the parking lot,restoration scheme is to extract sand and gravel above and under water in the foundation pit,as well as under the base,pump water to let the structure reposition and sink down till no further,and grout underwater abutment onto the base.
通过对停车场裂纹、沉降、位移等的观测,复位方案为基坑水上掏砂石,基坑水下掏砂石,板底掏砂石,降水使结构下沉复位到不能再沉,水下板底支墩注浆,等支墩强度达到设计要求后,抽干基坑水至板底以下,进行板底填充注浆,复位工作结束。
参考词条
补充资料：端坐复位法
端坐复位法
端坐复位法 正骨手法之一。该法适用于腰椎间盘突出症及颈椎错位等疾患的治疗。方法为：坐于方凳上，两脚分开与肩等宽。医者可坐于患者背后。以患棘突向右偏歪为例：首先用双拇指触摸法，查清偏歪棘突之位置，然后右手自患者右腋下伸向前，左手掌部压于颈后，拇指向下方，余四指扶持左颈部（使患者稍低头），同时嘱患者双脚踏地，臀部正坐不准移动（助手面对患者站立，两腿夹入患者左大腿，双手压入左大腿根部，维持患者正坐姿势），左手拇指扣住偏向右侧之棘突，然后医者右手拉患者颈部，使身体前倾90度（或略小），接续向右侧弯（尽量大于45度），在最大侧弯位，医者以右上肢使患者躯干向后内侧旋转，同时左手拇指顺势向左上顶腰椎棘突，即可察觉指下椎体有轻微错动，往往伴随“喀啪”一声。之后，双手拇指从上至下将棘上韧带理顺，同时松动腰肌。最后用一手拇指从上至下顺次按压一遍棘突，检查歪斜棘突是否已拔正，上下棘间隙是否已等宽。棘突向左侧歪时，医者扶持患者肢体和牵引方向相反，方法相同。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。