1) broach-cutter break
拉刀断裂
2) cut off broach
切断拉刀
3) tensile fracture
拉伸断裂
1.
Effects of interfacial IMC on tensile fracture behavior of Sn-3.0Ag-0.5Cu solder joints on copper substrates;
界面金属间化合物对铜基Sn-3.0Ag-0.5Cu焊点拉伸断裂性能的影响
2.
Thermographic detection method of tensile fracture process for cracked metal specimens;
含裂纹金属拉伸断裂过程的热像检测方法
3.
Characteristics analysis of acoustic emission signals from steel specimens under tensile fracture and fatigue crack condition
钢制试件拉伸断裂及疲劳开裂声发射特征分析
4) Drawing fracture
拉拔断裂
1.
Cause analysis of ER70S -6 wire rod drawing fracture
ER70S-6盘条拉拔断裂原因分析
2.
It is pointed out by microstructure analysis that the net carbides in microstructure of steel is main cause of drawing fracture.
介绍高强度80钢盘条的生产工艺流程和力学性能指标,通过金相组织分析,指出钢的组织中出现网状渗碳体是拉拔断裂的主要原因,采用人工时效并改进拉拔工艺,使各道次的压缩率均匀合理,在一定程度上可以弥补组织不当带来的缺陷,有利于盘条的拉拔。
3.
Such aspects as crack on surface of raw material, ununiformity of surface microstructure, bainite structure, composition segregation, severe inclusion are main cause for drawing fracture of steel wire rod for welding.
原料表面裂纹、表面组织不均、贝氏体组织、成分偏析、夹杂物严重是引起焊接用盘条拉拔断裂的主要原因。
5) tension shear fracture
拉剪断裂
6) cup fracture
深拉断裂
补充资料：刀刀
1.动摇貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条