1) powdered ratio
成粉率
1.
The effects of stirring speed,(amount) of coagulating agent,separating agent,temperature of coagulation and forming(agent) adding on powdered ratio of PSBR 1712 were studied.
研究了搅拌转速、凝聚剂用量、隔离剂用量、凝聚温度以及成型剂加入温度对PSBR 1712成粉率的影响。
2.
The effects of Mooney viscosity of latex, mass ratio of water to latex, coagulating temperature, stirring speed and different types of centrifugal machine on powdered ratio of PNBR were discussed.
以兰州石化公司自主开发的粉末丁腈橡胶(PNBR)(牌号为DN214)的中试工艺条件为基础,在3kt/a粉末丁苯橡胶装置上进行了PNBR的工业试验,探讨了胶乳门尼黏度、水胶比(质量比)、凝聚温度、搅拌转速、离心方式对PNBR成粉率的影响。
3) flour yield
出粉率
1.
Milling Quality and Inheritance of Kernel Hardness and Flour Yield of Common Wheat (Tricium aestivum L.);
普通小麦磨粉品质和籽粒硬度与出粉率遗传规律的研究
2.
It can expedite flour maturity, improve the colour and luster of flour, restrain flour going moldy and advance the flour yield.
详细阐述了过氧化苯甲酰在面粉中的主要作用,在面粉中添加面粉增白剂可加快面粉的后熟、改善面粉色泽、抑制面粉的霉变以及提高小麦的出粉率。
3.
The influence of striking detacher on flour milling properties were studied by determining the milling material granularity distribution,by flour yield determination and dough rheological test before and after using striking detacher.
通过对撞击机撞击前后的物料进行粒度分级、出粉率的测定和粉质的化验,讨论了撞击机对制粉效果的影响以及在不同撞击强度下撞击机对面粉品质的影响。
4) grinding efficiency
粉磨效率
1.
This article, considering that grinding efficiency improvement of cement grinders can lead to production improvement per grinder, and starting with improving the fineness of finished products, has listed several measures to improve the production and quality of cement grinders.
文章从提高水泥磨的粉磨效率,进而提高水泥磨的台时产量,提高水泥成品细度入手,列举了几种提高水泥磨产质量的技术措施。
2.
Through a mixture of several grinding agents most in use and theagent of LQ 2301 compound can effectively increase the cement powders grinding efficiency and economicresults.
在研究助磨剂作用机理的基础,实验中通过几种常用类型助磨剂的复配,研制出优化的LQ2301复合助磨剂,实验证明它能有效提高粉磨效率及经济效益。
5) pulverization
[英][,pʌlvərai'zeiʃən] [美][,pʌlvəraɪ'zeʃən]
粉化率
1.
The study of the mineral phase and the structure of the dolomite,combined with the research of its calcining performance and its pulverization after calcining,the results showed that the pulverization and the other metallurgical performance of the dolomite are related to the characteristic of the dolomite mineral phase.
实验研究了白云石矿物相形貌与结构、煅烧性能及煅烧后粉化率。
2.
In present study,the mineral phase and the structure of the dolomite was investigated focus on its calcining performance and pulverization after calcining.
本文研究了白云石煅烧性能及煅烧后粉化率与矿物相形貌与结构的关系。
6) starch yield
淀粉得率
1.
A laboratory wet-milling process was used to determine steeping characteristic,starch yield and the purity of corn dried under different drying temperature.
用湿法提取玉米淀粉的实验室方法,对不同温度干燥后玉米的浸泡特性、淀粉得率及纯度进行了研究。
2.
The test was designed applying quadratic regression orthogonaltest and amathematic model characterizingthe relationship among the parameters includingsteeping time,temperature,concentration of SO_(2,)and starch yield was established.
应用二次回归正交试验进行试验设计,建立了玉米浸泡时间、浸泡温度、二氧化硫浓度与淀粉得率的数学模型。
3.
With the raw material of yellow dent corn, this test applies the technology of wet-milling extraction to get pure corn starch with high starch yield and fine quality.
以普通黄马齿玉米为原料,采用湿法提取淀粉工艺,制得淀粉得率高、优质纯净玉米淀粉;通过大量实验设计筛选出最佳提取方案:浸泡温度50℃,乳酸和NaHSO3浓度均为0。
补充资料：成焦率
分子式：
CAS号：
性质：装炉煤经高温干馏转变为焦炭的百分比。成焦率主要决定于煤质，也受炼焦条件如焦饼中心温度和炉型的影响。该值波动较大，一般在72％～78％，最高可达82％。成焦率的计算方法有三类：(1)利用煤、焦炭灰分之间的关系式求得，此式的结果往往比实测值低。(2)用装炉煤和焦炭的挥发分求得成焦率。(3)由煤质与煤焦操作条件求成焦率。
CAS号：
性质：装炉煤经高温干馏转变为焦炭的百分比。成焦率主要决定于煤质，也受炼焦条件如焦饼中心温度和炉型的影响。该值波动较大，一般在72％～78％，最高可达82％。成焦率的计算方法有三类：(1)利用煤、焦炭灰分之间的关系式求得，此式的结果往往比实测值低。(2)用装炉煤和焦炭的挥发分求得成焦率。(3)由煤质与煤焦操作条件求成焦率。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条