1) tooth form of hobbing cutter
滚刀齿形
1.
By analysing for grinding theeth allowance and the form of grinding theeth allowance for cylinder gear numerical control mold grinding,the tooth form of hobbing cutter for preprocessing cylinder gear is determined in experience,which is practical reference to design hobbing cutter for preprocessing numerical control mold grinding cylinder gear.
通过对磨齿余量和数控成形磨削圆柱齿轮的磨削廓形的分析,确定出预切数控成形磨削的圆柱齿轮的滚刀齿形,为圆柱齿轮数控成形磨削预切加工的滚刀设计提供了参考依据。
2) qualified length of hob gear profile
滚刀齿形合格长度
1.
In this paper,calculation method for profile error of modified ZI worm hob #is studied Factors that design parameters and relieving technical parameters affect profile error are analyzed theoretically, a new relieving technique called "changing hight of wheel center"is proposed,This creates a new way for the increase of qualified length of hob gear profile.
本文研究了修形ZI蜗轮滚刀齿形误差的计算方法，从理论上分析了滚刀设计参数和铲磨工艺参数对齿形误差的影响，提出了变砂轮中心高铲磨新工艺，为增加滚刀齿形合格长度开辟了新途径。
3) hob
滚刀
1.
Profile Machining of Gear Hob and Worm Hob;
齿轮滚刀及蜗轮滚刀的齿形加工
2.
The Influence of Design of Hob Cutter Tip on Teeth Bending Strength;
滚刀刀顶设计及对齿根弯曲强度的影响
3.
Screw Rotor Hob Accuracy Design;
具有尖点廓形螺杆转子滚刀精确设计
4) hobbing cutter
滚刀
1.
Caculation of principle error of involute profile processed by Archimedean hobbing cutter;
用阿基米德滚刀加工渐开线齿形的原理误差计算
2.
The equation of single hobbing cutter's locomotion locus and the mathematical model of its instantaneous cutting area are established.
建立了单把滚刀旋切运动的轨迹方程和瞬时切削面积的数学模型,在此基础上对旋切面积的数学模型进行分析及简化,为旋切技术的实际应用提供了有力的依据。
3.
This paper analyses the source of the hobbing gear error and provides the revised quantity of the hobbing cutter for the medium_hard gear according to calculation result and materials concerned.
分析了滚齿齿轮齿形误差的来源 ,并根据计算结果和有关资料给出了滚切中硬齿面齿轮用滚刀的修形量。
5) rolling cutter
滚刀
1.
The structure and material of rolling cutter, the corresponding heat treatment, the edge grinding technology and the machine structure have been improved and renovated.
通过对塑料制袋滚切技术的深入研究,在滚刀结构、材料及热处理工艺、刃磨技术和滚切机构方面进行了全面的改进和更新。
2.
The new rolling cutter for the recoiling vest-like plastic bag manufacturing device is developed, the structure, material, heat treatment process and edge grinding techniques are improved.
研制了卷装背心袋式塑料制袋机用新型滚刀，在刀具结构、材料、热处理工艺和刃磨技术等方面 进行了全面的改进和更新。
3.
According to the literature about the manufacture models of three kinds,radial feed-rolling cutter,broach and Gleason cutter,the effect of centre point-centre line method,centre deviation method and oblique feed on qualified gear length were inspected.
根据滚刀、拉刀及格利森铣刀盘三类径向进给的制造模型相关文献，考察了中点中线法、中心偏移法、斜向进给对给出合格齿长的影响，指出了各类刀具的制造模型的异同，为这种研究提供了借鉴
6) Hobs
滚刀
1.
It raises holbing effidency and tool ide by 100% than that of ordinary hobs.
研制了制造高速重载齿轮的长短齿磨前滚刀。
2.
Based on the research on the meshing between hobs and gears the optimum proflie design method of the pre-gringding hob is given,and the optimum profile of the pre-gringding hob used to cut the quasi high-speed locomotive traction gear has been designed according to the application of the traction and their proceeding technolog.
通过对刀齿啮合关系的研究，提出了磨前滚刀齿形优化设计方法，针对准高速机车牵引齿轮的应用和加工工艺特点，对准高速机车牵引齿轮磨前滚刀齿形进行了优化设计。
参考词条
补充资料：齿形三角带
分子式：
分子量：
CAS号：
性质：又称同步齿形胶带。综合皮带、链条、齿轮等传动部件的优点。以钢丝或合成纤维做中心骨架层，工作面成齿形环状。一般是用液体聚氨酯橡胶浇注后经固化而成。也有以氯丁胶为主的。
分子量：
CAS号：
性质：又称同步齿形胶带。综合皮带、链条、齿轮等传动部件的优点。以钢丝或合成纤维做中心骨架层，工作面成齿形环状。一般是用液体聚氨酯橡胶浇注后经固化而成。也有以氯丁胶为主的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。