1) Oil treatment
充油处理
2) oil extended
充油
1.
Applications of uniform design in synthesizing oil extended solution polymerized styrene-butadiene rubber(Ⅰ);
均匀设计在合成充油SSBR试验中的应用(Ⅰ)
2.
Applications of uniform design in synthesizing oil extended solution polymerized styrene-butadiene rubber(Ⅱ);
均匀设计在合成充油SSBR试验中的应用(Ⅱ)
3.
The study on oil extended S SBR;
充油溶液聚合丁苯橡胶的研究
3) extender oil
填充油
1.
Effects of extender oil on the structure and properties of styrene-[ethylene-(ethylene-propylene)]-styrene block copolymer;
填充油对聚苯乙烯-b-聚〔乙烯-(乙烯-丙烯)〕-b-聚苯乙烯结构与性能的影响
2.
Effects of extender oils on properties of SBS;
填充油对SBS性能的影响
3.
The content of aromatichydrocarbon in extender oil was the key factor which influenced the light stability of oil-extended SBS greatly.
充油SBS在生产过程中的变色主要是由于偶合后残存的SB活性链与防老剂 10 76的酯基反应引起的 ;影响充油SBS光稳定性的关键因素是填充油中的芳烃含量 ;向充油SBS中填加光稳定剂 ,是提高充油胶光稳定性的重要措施 ,UV -P能显著提高充油SBS的光稳定
4) oil-extended SBR
充油SBR
1.
Influence of environment-friendly aromatic oil on properties of oil-extended SBR;
环保芳烃油对充油SBR性能的影响
5) oil-extended rubber
充油橡胶
1.
The oil-extended processing properties and the mechanical properties of the oil-extended rubber of high Mooney viscosity trans-1,4-polyisoprene with supported titanium catalyst system were studied.
采用干法充油工艺,对用负载钛体系催化异戊二烯本体沉淀聚合得到的高门尼粘度反式 1,4 聚异戊二烯(TPI)的充油工艺性能及充油橡胶的性能进行了研究。
2.
The Mooney viscosity of oil-extended rubber extended same amount of cycloalkyl oil increased with the increases of the Mooney viscosity of latex.
结果发现,调节叔十二碳硫醇用量可制备出具有不同相对分子质量的SBR1778胶乳;胶乳的门尼粘度越高,填充相同份数环烷烃油后其充油橡胶的门尼粘度也越高。
6) filling gel
填充油膏
1.
It possesses the excellent oxidative stability and colloidal stability of filling gel to optical fiber loose tube prepared with complex thickener and blended base Stock,it solves the problem of hydrogen-escape,and its properties reach the level of imported sample.
用复合稠化剂和调合基础油制备的光纤松套管填充油膏具有良好的氧化安定性和胶体安定性,解决了填充油膏的析氢问题,其性能达到了进口样品的水平。
参考词条
补充资料:充炭黑充油丁苯橡胶
分子式:
分子量:
CAS号:
性质:同时含有炭黑和油的丁苯橡胶。性能和用途与充炭黑丁苯橡胶和充油丁苯橡胶相似。由冷聚丁苯胶乳与炭黑的水分散液和油乳液经混合、凝聚、洗涤、过滤、干燥等步骤制得。
分子量:
CAS号:
性质:同时含有炭黑和油的丁苯橡胶。性能和用途与充炭黑丁苯橡胶和充油丁苯橡胶相似。由冷聚丁苯胶乳与炭黑的水分散液和油乳液经混合、凝聚、洗涤、过滤、干燥等步骤制得。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。