1) GCr15 coating
GCr15涂层
1.
The results show that the surface micro-hardness of GCr15 coating reachs 980HV(68HRC)which is about four times higher than the hardness of substrate material(C grade steel).
研究了微弧熔覆GCr15涂层的结构和性能。
2) GCr15 steel
GCr15钢
1.
Effect of rare-earths carburizing on friction behavior of GCr15 steel laser melting layer;
稀土渗碳对GCr15钢激光熔凝层摩擦行为的作用
2.
The tribological properties of N~+ ion implanted GCr15 steel;
N~+注入GCr15钢摩擦磨损性能研究
3.
Friction and Wear Behavior of SiC_p/Al Composites Dry Sliding Against GCr15 Steel;
SiC_p/Al复合材料-GCr15钢干摩擦磨损行为研究
3) steel GCr15
GCr15钢
1.
The different heat treatment technology experiments are conduced for steel GCr15 to obtain different level of network carbide and demonstrate its effect on impact property.
对GCr15钢进行不同的热处理工艺试验,以获得不同级别的网状碳化物,网状碳化物对冲击性能的影响研究表明:网状碳化物级别升高,冲击性能下降;还研究了退火态与淬回火态网状碳化物之间的关系。
2.
20,comparison analysis is done to the conventional traveller ring and the one made of bearing steel GCr15 regarding the performance and the service life.
针对国产钢领普遍使用20低碳钢做材质,在使用中存在寿命短、纺纱质量差的弊端,对比了国内普通钢领和采用GCr15轴承钢制造的钢领的各种性能及使用寿命,并对后者的工艺进行了讨论,说明采用GCr15钢制造的钢领能满足目前高速纺纱机的需求,对提高成纱质量提供保证。
4) sprays to draw the layer
喷涂涂层
1.
Analyzed the coal gas drum breeze machine a measure for hanging ashen reason, passing by experimenting finding out understanding definitely, then pass a leafs round sprays to draw the layer, realizes to prevent the ashen to pile up on leafs round.
分析了煤气鼓风机叶轮挂灰的原因,经过试验找到了解决的措施,即通过叶轮喷涂涂层,实现了防止粉尘在叶轮上的堆积。
5) coating station
涂涂层站
6) coating
[英]['kəʊtɪŋ] [美]['kotɪŋ]
涂镀;涂层
补充资料：GCr15钢中的大型非金属夹杂物(铝酸盐)×500
GCr15钢中的大型非金属夹杂物(铝酸盐)×500
GCrl5钢中的大型非金属夹杂物(铝酸盐) ×500
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条