说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 热弹性
1)  thermoelasticity
热弹性
1.
Thermoelasticity effect on Si film irradiated by ultra-short pulse laser;
超短脉冲激光辐照硅膜的热弹性
2.
Investigation of the Heat Conduction and Thermoelasticity for Functionally Graded Material Plates
功能梯度材料板热传导及热弹性研究
3.
Starting from the goveming equation for the thermoelastic field of functionally gradient material,this paper shows that the functional for the problem of three-dimensional quasistaic thermoelasticity exists when the material propenies are only described by a function of the coordinates.
本文从梯度功能材料拟静态热弹性问题的控制方程出发,说明了梯度功能材料在其物性系数为坐标变量的函数时的三维拟静态热弹性问题的泛函是存在的,导出了相应的泛函,并建立了相应的变分原理。
2)  Thermoelastic
热弹性
1.
Fundamental Equations of Thermoelastic Finite Element Method for Axisymmetric Body;
轴对称热弹性问题有限元基本方程求解
2.
Investigation Scheme of the Space Remote sensing Camera Structure by Thermoelastic Analysis;
热弹性分析探讨空间遥感相机结构形式
3.
Two-Dimensional General Solutions and Fundamental Solutions for Orthotropic Thermoelastic Materials, Piezothermoelastic Materials and Electro-magneto-thermo-elastic Materials with Applications;
正交各向异性热弹性材料、压电热弹性材料和电磁热弹性材料的二维通解和基本解及其应用
3)  thermal elasticity
热弹性
1.
The thermal dynamic characteristic of ball-screw when taking into account its thermal elasticity;
考虑热弹性的滚珠丝杠热动态特性
4)  thermo-elasto-plastic
热弹塑性
1.
The Finite Element Method to the Thermo-elasto-plastic Problems of Shell Structures;
壳体热弹塑性问题的有限元求解方法
2.
The temperature and stress-strain field of steel plate runout table cooling are simulated using thermo-elasto-plastic finite element method.
针对钢板冷却发生翘曲变形的问题,利用热弹塑性有限元法对中厚板冷却过程的温度场及应力应变场进行数值模拟。
3.
The property thermo-elasto-plastic properties of the rock under the high temperature are analyzed and researched in this paper.
分析研究了岩石在高温高压作用下的热弹塑性力学特性,研究了岩石的加、卸载过程,根据损伤力学的基本理论,推导了温度作用下的岩石热弹塑性力学特性本构方程。
5)  thermo-elastic-plastic
热弹塑性
1.
Analysis of thermo-elastic-plastic creep of pressure vessels at high temperature;
高温条件下压力容器热弹塑性蠕变分析
2.
Based on the theory of thermo-elastic-plastic,changes of material properties with temperature were considered,and the strain-stress-temperature coupling constitutive equations on thermo-elastic-plastic of flexural reinforced concrete members were deduced.
在热弹塑性理论的基础上,考虑了材料性能随温度的变化,导出了钢筋混凝土受弯构件热弹塑性问题的应力-应变-温度耦合本构方程。
6)  thermal elasto-plastic
热弹塑性
1.
A thermal elasto-plastic contact model which can take into account the effects of temperature-dependent yield strength was developed by using finite element method.
应用有限元方法建立了可考虑屈服应力温度相关效应的粗糙表面热弹塑性接触模型。
2.
A spacial axisymmetric finite element calculational model is established to calculate temperature rise and thermal stresses during static laser heating of a metal plate by using thermal elasto-plastic constitutive relation and incremental FEM.
使用热弹塑性本构关系和增量有限元法,建立了激光静态加热金属板的空间轴对称有限元计算模型,计算了金属受激光加热过程中温升和热应力,分析了在激光加热过程中热膨胀和热软化的共同作用对于热应力的影响,提出了“环箍效应”解释高斯激光束导致的热应力分布的特征。
补充资料:热弹性马氏体

thermoelasticmartensite:某些非铁合金于马氏体相变时,马氏体的晶体随温度的降低而增大;反之,已长大了的马氏体晶体于升温时又随温度的回升而缩小乃至消失;当重复地予以冷却和加热时,若条件适当,则马氏体晶体又可在原处出现、增大以及缩小、消失。这样的马氏体称为“热弹性马氏体”。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条