1) high carbon ferromanganese
高碳锰铁
1.
It analyses the behavior of remained ferroalloy in smelting process, proves that taking use of remained ferroalloy process notonly can greatly improve technological economic indexes in smelting high carbon ferromanganese and ferromanganese-silicon, but also can raise the productivity of furnace.
通过留铁法在冶炼过程中的行为实践分析,证明留铁法冶炼高碳锰铁和锰硅合金不仅大大地改善了技术 经济指标,而且提高了电炉的生产能力。
2.
Adopting microwave digestion technology to digest samples, the contents of Si, P, Cu and V in high carbon ferromanganese are determined with ICP-AES method, and the optimal work conditions are researched.
采用微波消解技术消解样品,用ICP-AES法测定高碳锰铁中Si,P,Cu,V含量,研究该方法的最佳工作条件,通过对样品的分析试验、回收试验及精密度试验,证明该方法准确度高,精密度好,与化学法相比该方法快速、实用。
3.
Based on the domestic manganese mineral resources and the common fluxe smelting processes for high carbon ferromanganese and Mn Si ferroalloy by submerged electric furnace, the main technological and economic indexes were compared and analyzed.
根据我国锰矿资源条件 ,结合现行的熔剂法工艺在电炉中冶炼高碳锰铁和锰硅合金 ,通过对多项主要技术经济指标的对比和可行性分析表明 ,高硅酸性锰矿采用无熔剂法或少熔剂法工艺生产锰硅合金 ,既可提高锰和硅的回收率 ,增加铁合金产量 ,使锰矿资源得到更充分的利用 ;又可降低能耗和原料的消耗 ,使产品的生产成本降低 ,经济效益提
2) high carbon ferromanganese alloys
高碳锰铁合金
1.
How to utilize the imported manganese ore fines containing high combined water to make good quality,and then to smelt high carbon ferromanganese alloys was studied.
本研究主要以某进口高结晶水锰矿粉为原料,通过制取合格成品球团矿,进而通过电炉冶炼制取高碳锰铁合金,为国内有效利用此类锰矿粉提供合适的途径。
4) low carbon ferromanganese
低碳锰铁
1.
To reduce carbon content, taking the following measures such as increasing silicon conlent([Si]%>25%) in silicomanganese, reducing outside carbon content,operating in low basicity in smelting low carbon ferromanganese etc.
为降低碳含量,在低碳锰铁生产过程中,通过提高锰硅合金中硅含量([Si]％>25%),减少外部增碳以及采用低碱度操作等措施,得到了理想的低碳锰铁生产工艺。
5) high carbon and high manganese steel
高碳锰钢
6) High Manganese Carbon Steel
高锰碳钢
补充资料：高碳锰铁
高碳锰铁根据生产方法不同分为电炉高碳锰铁和高炉高碳锰铁。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条