说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 监控软件
1)  Monitoring software
监控软件
1.
Design of monitoring software for industrial power-distribution system based on AIFCS;
基于AIFCS工业配电系统的监控软件设计
2.
The Application of Multi-thread in Experiment Monitoring Software Development;
多线程技术在远程实验监控软件开发中的应用
3.
OPC’s application in CEMS monitoring software
OPC技术在CEMS监控软件中的应用
2)  monitor software
监控软件
1.
Design Of Monitor Software Based On Interface Program Of 1553B Emulational Board;
基于1553B仿真卡界面程序的监控软件设计
2.
The design of monitor software in high-power solid laser processing system;
大功率固体激光加工系统监控软件的开发
3.
Its automation system used Modbus plus (MB+) network with redundant function, iFIX monitor software and Modicon Quantum PLC to complete data collection and monitor of the blast furnace proper and the blast heater.
马钢第一炼铁厂9#高炉由原容积300m3增容到380m3,其自动化系统采用了具有冗余功能的Modbusplus(MB+)网络、iFIX的监控软件和ModiconQuantumPLC完成高炉本体和热风炉等数据采集与监控、高炉炉顶、上料槽下和鼓风机系统的控制,全面满足了380m3高炉主要生产工艺要求。
3)  monitoring and control software
监控软件
1.
Research and development of monitoring and control software of marine power distribution system based on Kingview;
基于组态王的船舶配电系统监控软件研制
2.
The paper mainly discussed how to apply the COM technology in mine monitoring and control software, and described the implementation method of correlative technology in detail.
主要论述了如何将组件技术运用到煤矿监控软件中,并详细描述了相关技术的实现方法。
3.
In this paper, an open monitoring and control software in motor control center was introduced.
介绍了具有开放性的电动机控制中心监控软件
4)  Monitoring and Controlling Software
监控软件
1.
UPS Monitoring and Controlling Software for Linux;
Linux平台下的不间断电源监控软件
2.
The monitoring and controlling software is composed of real time monitoring and controlling system, management maintenance system, database management system and report management system.
监控软件由实时监控系统、管理维护系统、数据库管理系统和报表分析处理系统组成,监控对象由维护系统创建,它们模拟实际煤矿系统并实施监控,并与监控、维护、用户界面及数据库紧密联系。
3.
At present, the automatic technology is universally known and the mini monitoring and controlling software is widely required by minor enterprises.
当前 ,自动化技术受到人们的普遍关注 ,小型监控软件具有较大的市场需求。
5)  monitor and control software
监控软件
1.
The programming principle and implementation of device driver of the communication between monitor and control software, for example MCGS, and PLC or gathering clips or aptitude instruments, was presented in this paper in detail.
以MCGS监控软件为例 ,详细介绍了监控软件与PLC、采集板卡、智能仪表等进行数据通信的设备驱动程序的编制原理与实现。
2.
This article introduces the technology of developing the monitor and control software for DCS.
本文介绍基于VFP的DCS监控软件设计技术。
6)  Software monitoring
软件监控
补充资料:利用UG软件后置处理由MAX-5软件生成的刀位文件
  MAX-5是叶轮专用的编程软件,UG则是在国内应用较广的CAD/CAM系统。MAX-5后置处理的通用性较差,而UG则具有灵活的后置处理功能,本文作者将二者巧妙地结合在了一起,不仅实现了二者的优势互补,而且为成功解决生产中遇到的实际问题开拓了思路。


一、前言


    对于直纹面叶轮的5轴铣削加工,熟悉的人都清楚叶轮专用编程软件MAX-5有着明显的优势。该软件加工轨迹的定义方式丰富、刀具选择面广,加工效果非常好。但由于是专用软件,它的后置处理程序是由软件公司根据实际机床结构编写的,不具有通用性和可编辑性。实际的工作中,我们可能会碰到各种不同运动关系和结构的机床,是否可以提取MAX-5生成的刀位文件而通过其他的软件去实现灵活后置呢?如果这样的方式能够实现,将带给我们极大的方便,同时也增强了MAX-5软件的适应性。


    UG是一款高端的一体化软件,其CAM功能中的可变轴铣削方式就能够实现多轴加工。同时该软件还有一个很大的好处,它对自身的刀位文件可以灵活地后置,通过用户定义的后置处理程序就可生成实际机床所需的代码文件。由此,我们尝试通过UG软件去后置MAX-5软件生成的刀位文件,并成功地在双旋转工作台5轴机床上得以实现。本文就该方式的具体实现过程介绍如下。


二、UG软件多轴加工后置处理程序的用户自定义


    UG软件中的Post-Builder是提供给用户定制后置处理程序的功能模块。该模块如图1所示,不仅可以对程序结构和代码进行定义,同时也可以对机床的运动关系进行定义,这就为我们创造了条件。在这里,考虑多轴加工的后置,我们主要介绍定义机床的运动关系部分,其余的不作叙述。



图1 UG的Post-Builder功能模块


    先探讨一下UG软件提供的机床定义功能。如图2所示,在Create New Post Processor界面里,机床的定义包括了所有的5轴运动关系,这里需要定义与实际相符的机床运动关系,在本文中定义为5-Axis with Dual Rotary Tables方式,然后明确其他选项,进入后续的定置。在5—Axis  Mill的定义中 ,有General Parameters 、Fourth Axis、Fifth Axis共三个部分需要定义,可参照UG的培训教程,这里不作详述。如图3所示,值得注意的是各旋转轴同机床零点之间的相互几何关系和各旋转轴的旋转角度偏移定义,对于后置处理的正确性影响较大。


说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条