1)  electrode allocation
电极布置
1.
Taking humid air as the free radical source matter, the influence of electrode allocation variation in a reactor upon corona discharge property and upon oxidation process of NO corona has been studied.
使用湿空气作为自由基源物质,研究反应器中电极布置变化对电晕放电特性和NO电晕氧化过程的影响。
2)  electrode
电极
1.
Accelerated tests for electrodes and characterization of their chlorine-evolution lifetime;
电极的强化测试与析氯寿命的表征
2.
Intelligent prediction modeling and application research on the Angang FSF electrode;
安钢FSF电极智能预测建模及应用研究
3.
Application of PLC in the Electrode Automatic Adjusting System for EF Melting;
浅析PLC在电弧炉炼钢电极自动调节系统中的应用
3)  electrodes
电极
1.
Influence of binder on properties of carbon nanotube electrodes;
粘结剂对碳纳米管电极性能的影响
2.
Electrodes Experiment Studying of the Direct Current Plane Electromagnetism Pump;
直流平面电磁泵电极实验研究
3.
Study on electrochemical properties of the electrodes coated with the gradient functional oxide;
梯度功能氧化物电极的电性能研究
4)  pole
电极
1.
It points out that the direct spot welding of pure copper can be realized by the correct choice of pole material,pole form,welding equipment and criterion.
找出了用通常方法不能点焊纯铜的原因 ,介绍了纯铜点焊焊核形成的过程 ,指出以本文为依据正确地选择电极材料、电极形状、焊接设备和确定焊接规范 ,就可实现纯铜的直接点
2.
Having a discussion on the highresistance of insulating material and the way to measure the volume resistivity,introducing the produce method of examing pole influenced by leakageproof current,and adopting different ways to measure certain insulating material practically,obtaining a good result.
对绝缘材料的高电阻和体积电阻率的测量方法进行了探讨,介绍防漏电流影响检测电极的制作方法,并采用不同方法对某型绝缘材料进行实际测量,得出了较好的结果。
3.
With the thought of "perturbation", this paper analyes the solution of Laplace equation for poles having irregular boundary.
研究电极的位移形变所产生的误差时 ,需要在不规则边界条件下求解拉普拉斯方程 。
5)  nitric oxide sensors
NO电极
6)  Modified electrode
修饰电极
1.
The Electrocatalytic Properties of Au Core-Pt Shell Nanoparticle-Modified Electrode for Formaldehyde in Acidic Aqueous;
金核-铂壳纳米修饰电极在酸性溶液中对甲醛的电催化氧化
2.
Study on fabrication of PB/MWNTs modified electrode through sequential deposition method and its electrochemical performance;
顺序化学沉积法制备PB/MWNTs复合修饰电极及电化学性能研究
3.
Electrochemical Luminescence Behaviors of Ionic Polymer-Modified Electrodes;
离子型聚合物修饰电极的电化学发光特性
参考词条
补充资料:ANSYS SOLID65环向布置钢筋的例子

 ANSYS SOLID65环向布置钢筋的例子
! 一个管道,环向配筋率为1%,纵向配筋率为0.5%,径向配筋率为0.1%
! 作者: 陆新征 清华大学土木系
!
FINISH
/CLEAR


/PREP7
!*
! 单元属性
ET,1,SOLID65
!*
KEYOPT,1,1,0
KEYOPT,1,5,0
KEYOPT,1,6,0
KEYOPT,1,7,1
!*
!实参数1:不同方向配筋
R,1,2,.001, , ,2, .01,
RMORE, 90, ,2,.005 ,90 ,90 ,


!材料属性
!混凝土基本材料属性
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,30E2
MPDATA,PRXY,1,,.2
!屈服准则
TB,MISO,1,1,5,
TBTEMP,0
TBPT,,0.0005,15
TBPT,,0.001,21
TBPT,,0.0015,24
TBPT,,0.002,27
TBPT,,0.003,24
!破坏准则
TB,CONC,1,1,9,
TBTEMP,0
TBDATA,,.5,.9,3,30,,
TBDATA,,,,1,,,
MPTEMP,,,,,,,,
MPTEMP,1,0
!钢材基本属性
MPDATA,EX,2,,200E3
MPDATA,PRXY,2,,.27
!屈服准则
TB,BISO,2,1,2,
TBTEMP,0
TBDATA,,310,2E3,,,,


! 管道内径和外径
CYL4,0,0,3000, , , ,10000
CYL4,0,0,2000, , , ,10000
VSBV, 1, 2


! 定义局部柱坐标
CSWPLA,11,1,1,1,
KWPAVE, 11
WPRO,,-90.000000,
VSBW, 3
WPCSYS,-1,0
KWPAVE, 1
WPRO,,,-90.000000
VSBW,ALL


ESIZE,500,0,
! 注意:设定单元局部坐标
VATT, 1, 1, 1, 11
!*
VSWEEP,ALL
/DEVICE,VECTOR,1
/ESHAPE,1.0
/REPLO
! 注意:红色代表最大配筋方向,绿色代表其次,蓝色表示最小配筋方向

说明:补充资料仅用于学习参考,请勿用于其它任何用途。