说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 竹木质高密度纤维板
1)  Bamboo-wood HDF
竹木质高密度纤维板
2)  BW MDF
竹木复合中密度纤维板
1.
The effects of fiber ratio of bamboo to wood, compression ratio and fibers screening distribution on properties of MDF from bamboo and wood(BW MDF)were studied with single factor analyzing method.
研究了竹木纤维混合比、压缩比和纤维筛分值等工艺条件对竹木复合中密度纤维板性能的影响。
3)  Bamboo MDF
竹材中密度纤维板
4)  MDF/HDF
中/高密度纤维板
1.
A preliminary study was conducted on applying Acacia mangium as a new MDF/HDF fiber source.
本文对马占相思作为中/高密度纤维板生产原料进行初步探索,分析了其纤维得率、纤维质量、纤维板坯预压性能以及成品板物理力学性能、表面质量及加工性能。
5)  high density fiberboard
高密度纤维板
1.
The results of research on the solution system indicate the application of formaldehyde catcher FC-1 and FC-4 in manufacturing high density fiberboard (HDF) with E2 formaldehyde emission enables the products, formaldehyde emission to reach E1 grade, and their physical and mechanical properties meet the requirements of the national standard without negative effect on productivity.
对该系统解决方案的研究结果表明:在生产E2级高密度纤维板(HDF)时配合使用克醛之星,产品甲醛释放量可达E1级,板材物理力学性能可满足行业推荐标准(LY/T1611—2003)要求且不影响生产效率;生产E1级HDF时,成本的增加可控制在50元/m3以内。
2.
An investigation was made on using small and medium diameter bamboo thinnings as raw material to replace wood partly for the production of high density fiberboard for laminate flooring.
利用中小径间伐竹部分替代木材生产强化木地板用高密度纤维板,实验室小试与生产性试验结果表明:在现有生产工艺基本不变的情况下,竹片加入量占原料总量的30%-50%时,产品的各项物理力学性能指标满足EMB/PS/HDF:1997欧洲强化木地板用高密度纤维板标准干条件下的要求。
3.
The paper analyzed the status of production capacity,output,technology level,production quality and structure,and market demand of medium and high density fiberboard in China,and then discussed and predicted the development trend.
对我国中高密度纤维板的生产能力和实际产量、技术水平和实物质量、产品结构和市场需求等现状进行剖析,对今后的发展趋势进行探讨和分析。
6)  HDF
高密度纤维板
1.
Present Conditions and Development Trends for the MDF/HDF Industry in China;
我国中/高密度纤维板发展现状与思考
2.
Study on Manufacturing Technology of HDF for Floor;
地板用高密度纤维板的研制
补充资料:泥炭木质纤维板
泥炭木质纤维板  该板以泥炭与枝丫材为原料,采用干法工艺,施加新型化工助剂压制成板。其泥炭含量为43—60%;枝丫材纤维含量为57—40%,干法压制的纤维板,其物理力学性能,根据泥炭含量分别达到国家硬质纤维板标准的一、二级品水平,其中静曲强度471.82kg每平方厘米,容积重1230kg每立方米,吸水率20.56%,含水率4.26%。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条