1) porosity model
孔隙度模型
1.
Application of multivariate statistics in establishment of porosity model;
多元统计方法在储层孔隙度模型建立中的应用
2.
Methods As for the porosity model, the quantitative correction method of gas influence on acoustic logging is explored; with regard to the permeability model, starting with the analysis of the micro pore structure that influences the reservoir permeability, and fully usi.
方法对于孔隙度模型,提出声波测井曲线天然气影响的定量校正方法,实现应用“JD-581”常规测井资料建立孔隙度测井解释模型研究的需要;对于渗透率模型,从影响储层渗透能力的微观孔隙结构分析入手,以毛管理论为指导,综合应用各种资料,建立了渗透率测井解释模型。
2) dual porosity model
双孔隙度模型
1.
Anisotropic petrophysical model based on isotropic dual porosity model and its application;
基于各向同性双孔隙度模型的各向异性岩石物理模型及其应用
3) multi-scale porosity model
多尺度孔隙模型
1.
The multi-scale porosity model depicting infiltration induced changes of carbon fiber preform and the mathematical model depicting ICVI process for fabrication of C/SiC composites were developed.
根据C／SiC复合材料的结构以及等温化学气相浸渗法的工艺特点,建立了ICVI过程中C纤维预制体结构变化的多尺度孔隙模型和C／SiC复合材料ICVI致密化过程的数学模型。
4) 3D porosity model
三维孔隙度模型
1.
Aiming at the practical development of H 3 2 reservoir in Pinghu oilfield, a 3D interlayer model is build by the stochastic simulation method, and then a 3D porosity model by the deterministic modeling.
本文针对平湖油气田H3 2 油藏开发实际 ,先采用随机建模方法建立油藏的三维夹层模型 ,再用确定性建模方法建立油藏的三维孔隙度模型 ,并依此对夹层模型进行校正 ,然后用于生产动态预测。
5) porosity evolution model
孔隙度演化模型
1.
Application of porosity evolution model to reservoir assessment of Zhuhai Formation in Enping Sag
恩平凹陷珠海组储层的孔隙度演化模型
2.
The paragenetic sequence and porosity evolution model were created.
根据普通薄片、铸体薄片、扫描电镜、储层物性等资料,分析了下干柴沟组下段的孔隙结构和成岩演化特征,建立了成岩序列与孔隙度演化模型。
6) pore model
孔隙模型
1.
In order to study the change mechanism of permeability in high - saliferous oil reservoir by waterflooding, the change of it is studied under different displacement rate ,salinity, core permeability, injected water quality,multiple of displacement volume on the basis of experiments in microscopic pore model of core slice.
为了研究高含盐油藏水驱渗透率变化机理,在岩心薄片微观孔隙模型实验的基础上,研究了高含盐油藏水驱储层渗透率在不同驱替速率、含盐量、岩心渗透率、注入水性质、驱替孔隙体积倍数等条件下的变化,并且对驱替过程中孔隙变化的微观图像进行了对比。
2.
The crack growth law of pore models and the damage law of pores and solid media are obtained for different loads and CT observation scales.
为了研究孔隙对岩石力学性能的影响,利用自制的孔隙物理模型,通过单轴压缩和CT扫描实验研究了受载条件下孔隙率对岩石孔隙结构的演化及其对外部物理力学性能的影响,得到了不同加载阶段和不同CT观察尺度下孔隙模型的裂纹扩展规律以及孔隙和固体介质的损伤变化情况。
补充资料：催化剂孔隙度(degree of catalyst pole)
分子式：
CAS号：
性质：又称催化剂孔隙度(degree of catalyst pole)。多孔性催化剂颗粒内微孔的总体积，单位是ml/g。其大小由催化剂制备条件决定。
CAS号：
性质：又称催化剂孔隙度(degree of catalyst pole)。多孔性催化剂颗粒内微孔的总体积，单位是ml/g。其大小由催化剂制备条件决定。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条