1) Al-Mg-Si-Cu based alloy
Al-Mg-Si-Cu基合金
1.
Effect of microelement Sr on corrosion properties of Al-Mg-Si-Cu based alloy auto sheets;
微量元素Sr对Al-Mg-Si-Cu基合金车身板腐蚀性能的影响
2.
Effect of heat treatment between cold rolling on rolling textures of Al-Mg-Si-Cu based alloy sheets
冷轧间热处理对Al-Mg-Si-Cu基合金板材轧制织构的影响
2) Al-Si-Cu-Mg Alloy
Al-Si-Cu-Mg合金
1.
The effect of rare earth addition on Al-Si-Cu-Mg alloy shows different ways.
微量稀土能够影响合金的时效过程,稀土的加入能提高合金峰时效硬度,减小Al-Si-Cu-Mg合金的时效速度,推迟合金时效硬化峰的到来,延缓合金的过时效软化。
2.
Eutectic-near Al-Si-Cu-Mg alloy is good at casting and has high strength and other characteristics, so it is extensive used in industy.
近共晶的Al-Si-Cu-Mg合金具有铸造性能优良,比强度高,可热处理强化等特点,在工业生产中应用广泛。
3) Al-Mg-Si-Cu alloy
Al-Mg-Si-Cu合金
1.
The flow stress during hot compression deformation of Al-Mg-Si-Cu alloy;
Al-Mg-Si-Cu合金在热压缩变形中的流变应力
2.
Flow stress behavior of a new Al-Mg-Si-Cu alloy during hot compression deformation;
新型Al-Mg-Si-Cu合金热压缩流变应力研究
3.
Study on the microstructure of Al-Mg-Si-Cu alloy semi-continuously cast near liquidus
Al-Mg-Si-Cu合金近液相线半连续铸造组织研究
4) Al-Si-Fe-Cu-Mg alloy
Al-Si-Fe-Cu-Mg合金
5) Al-Si-Cu-Mg-Zn alloy
Al-Si-Cu-Mg-Zn合金
1.
The main issue is to study and design the structure of Thermal Energy Storage Room,which is based on phase change of Al-Si-Cu-Mg-Zn alloy.
本文的内容就是研究设计出一套基于Al-Si-Cu-Mg-Zn合金相变储热的储热系统,其核心是储热室的设计,合理的结构设计可以提高储热室内的热交换能力,延长储热系统寿命,增强系统运行稳定性。
6) Al-Mg-Si based alloy
Al-Mg-Si基合金
1.
The forming limit of Al-Mg-Si based alloy sheet was tested and the forming limit diagram(FLD) was determined by using FLD test and automated strain analysis and measurement system(ASAME).
采用成形极限图(FLD)试验,运用网格应变自动测试分析系统ASAME,对Al-Mg-Si基合金车身板的成形极限进行了检测,同时,将FLD应用于有限元分析作为成形时出现破裂缺陷的判据,并分析车门外板在冲压成形过程中破裂危险部位主应变在FLD上分布。
2.
Based on nonlinear elastic-plastic finite element theory,this paper has investigated the forming process of a new type Al-Mg-Si based alloy auto door panel by means of numerical simulation.
采用非线性弹塑性有限元法对Al-Mg-Si基合金车门外板冲压成形过程进行了数值模拟,分析了车门在成形过程中的应力、应变、厚度分布以及成形安全裕度的部位和规律,为Al-Mg-Si基合金车身板冲压成形工艺设计及模具设计提供了科学依据。
3.
Al-Mg-Si based alloy auto body sheet will be used widely in the future, but, in the recent, one of the difficulty in practice is its poor formability.
Al-Mg-Si基合金车身板材具有广阔的应用前景,其应用的难点之一是成形性能较差。
补充资料：Ti_(3)Al基合金(金属间化合物)涡轮导风板
Ti_(3)Al基合金(金属间化合物)涡轮导风板
TiaA，基合金(金属间化合物)涡、、风*。利;:，
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条