1) mill type
轧机机型
1.
Based on the test results and practice on 1700 mm hot strip mill, a reasonable strategy of selecting hot strip mill type is put forward.
通过测试并分析机组上游与下游机架对控制性能的不同要求、服役周期内工作辊和支持辊辊形变化及其对板形控制性能的影响,结合1700mm热连轧机进行的现场试验及工程应用实践,提出热轧上游机架应采用凸度控制能力较强的轧机机型,下游机架宜采用长行程窜辊型轧机机型,全机组均可采用强力弯辊和变接触轧制技术提高机组板形控制能力。
2) medium section mill
中型轧机
1.
The production situation,including selection of pass schedule,characteristic of pass design,trial rolling process as well as whole process,of having applying the technique of producing 270mm seamless tube blank on 550 medium section mill is introduced and summarized in the paper.
介绍了Φ550mm 中型轧机上采用Φ270mm 圆管坯轧制圆钢的生产情况,包括孔型系统的选择,孔型设计的特点,试轧情况及对试制过程进行了概括总结。
2.
The pass design of large gauge 20/12 5 unequal angle steel on medium section mill were introduced The butterfly pass and final pass design were mainly introduced The production show that the yield and percent of pass respectively reaches 90 62% and 99 57%,and the product quality meet the demand of standar
介绍了在唐钢中型轧机上开发 2 0 /1 2 5号大规格不等边角钢蝶式孔、成品孔的孔型设计情况。
4) y-type rolling mill
Y型轧机
1.
The rolling process and the design of pass of rolling mill were researched, meanwhile, the rolling pressure of Y-type rolling mill was also calculated.
本文从研究轧制原理入手,对轧制工艺及孔型设计进行了深入研究,给出Y型轧机轧制压力计算。
5) section mill
型钢轧机
1.
In the light of field experiments and research, the main causes of the frequent raptures of the drive link joints in elevating table for section mill are discovered to be the serious unbalanced stress of the link joints and too large fall of the oil pressure in balancing actuator during elevation and subsidence.
通过对某厂型钢轧机摆动升降台传动链板断裂原因的试验研究,找出其断裂频繁的主要原因是在升降过程中平衡油缸油压下降过大和各链板受力严重不均。
补充资料：适用机型
适用机型是指该配件所适用的笔记本电脑具体机型系列或型号。其中，大多数配件都是通用型产品，例如内存，硬盘等，可以在所有的笔记本电脑上使用；而少数产品则是专用型产品，例如扩展坞等，只能在特定品牌的特定机型上使用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条