说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 抗泡沫性能
1)  anti-foaming property
抗泡沫性能
1.
The research results of physicochemical index and serviceability show that the anti-emulsifiability, detergency and anti-foaming property of alkyl salicylate calcium increase with the number of carbon in the alkyl.
通过对产品理化指标和使用性能的研究,发现随着烷基碳数的增加,烷基水杨酸钙的抗乳化性能、清净性能、抗泡沫性能等都有提高的趋势。
2)  foam property
泡沫性能
1.
By measuring surface tension,cmc and foam property of the mixture of new non-ionic fluorocar- ben surfactant(Iutechem-01)and sodium dodecyl sulfate(SDS),their mutual action was reseached.
测定新型非离子氟碳表面活性剂(Intechem-01)与十二烷基硫酸钠(SDS)混合体系的表面张力、cmc、泡沫性能,研究了两者之间的相互作用。
2.
The catalyst in the preparation of alkyl polyglucosides is optimized,the effect of the proportion of reactants on the foam property of the product is studied and the surface tension and foam property of alkyl polyglucosides is tested.
对烷基糖苷合成中的催化剂进行了优选,研究了反应物配比对产品泡沫性能的影响,测试了烷基糖苷的表面张力和泡沫性能。
3)  foaming properties
泡沫性能
1.
The foaming properties are special.
m-1,从而可以在油面上更好铺展;同时表现出特有的泡沫性能。
2.
Foaming properties and dynamic surface tension(DST) of aqueous solutions of a series of sodium 2,4,5-trialkyl benzene sulfonates and sodium 2,5-dialkyl benzene sulfonates were determined.
研究了一系列直链三取代和支链双取代烷基苯磺酸钠水溶液的动态表面张力(DST)和泡沫性能,考察了分子结构变化对烷基苯磺酸钠水溶液的DST和泡沫性能的影响。
4)  foaming property
泡沫性能
1.
The foaming property of these desulfurizer solution, especially the MDEA solution was remarkably affected by activa.
本文研究了脱硫过程中 ,活性炭、Fe(OH) 3和 Fe S等固体颗粒对 LY-1 ,MDEA,DEA和 MEA脱硫剂溶液泡沫性能的影响。
5)  foam performance
泡沫性能
1.
On the foam performance of sulfate of cocamide monoethanolamide;
椰油酸单乙醇酰胺硫酸酯盐的泡沫性能研究
2.
In this paper, a systemetic study on the foam performance of sodium phthalate of mono lauryl alcohol(Abbreviation as PAS12) was made.
对新型阴离子表面活性剂邻苯二甲酸单月桂醇酯钠盐 (PAS 1 2 )的泡沫性能进行了系统研究 ,用罗氏法测定了其在不同浓度、不同温度、不同硬水度中的泡沫性能 ,并与两种同类表面活性剂的泡沫性能进行了对比。
3.
In addition,the influence of heating and mixing time on foam performance is analyzed.
文章介绍了一种通过正交试验合成的新的松香皂引气剂,并通过泡沫指标确定了其优化配比,同时分析了合成松香皂引气剂时的加热时间和搅拌时间对泡沫性能的影响。
6)  foam properties
泡沫性能
1.
The optimal complex foaming agent and its match were found according to the experiments about the foam properties of the four selected.
通过对优选的4种发泡剂及相互复配对泡沫性能的实验研究,得出了最优的复配发泡剂及配比。
2.
The foam properties of fatty alcohol-polyoxyethyleneether carboxylate were determined with Waring Blender method under varied conditions.
用WaringBlender法对月桂醇聚氧乙烯(9)醚乙酸钠(AE9C-Na)在不同条件下的泡沫性能进行了研究。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条