1) characteristics of raw materials
料性
1.
On the basis of cord appearance the following factors may influence the cord formation : characteristics of raw materials , temperature .
结合以往生产中出现的波筋主要表现形式,分别从玻璃的料性、温度与黏度、拉边机的外力、拉边机对横向温度及锡槽电加热系统等诸方面对玻璃带的影响进行了阐述。
2) reactive dye
活性染料
1.
Study on dyeing performance of the reactive dyes Delosol for wool;
毛用活性染料德龙素染色性能的研究
2.
Cold pad-batch sample dyeing with reactive dyes;
活性染料冷轧堆染色小样试验
3.
Jig dyeing with Anozol L reactive dye;
安诺素L型活性染料在卷染机上的应用实践
3) reactive dyes
活性染料
1.
Investigation on the factors affecting the soaping results of the fabrics dyed with reactive dyes;
影响活性染料染色物皂洗效果因素的探讨
2.
Wet processing of cotton fabric with reactive dyestuffs and anti-UV agent in one bath;
棉织物防紫外与活性染料同浴染整工艺探讨
3.
Presentation of the factors affecting the sunlight fastness of the reactive dyes;
浅谈活性染料耐日晒色牢度的影响因素
4) waterborne paint
水性涂料
1.
The applications of the resin above in waterborne ink and waterborne paint are discussed.
并对该树脂液在水性油墨及水性涂料方面的应用进行了论述。
2.
Meanwhile, the article introduces factors influencing paint stability when blocked isocyanates are applied in one-pack waterborne paint or electrophoresis paint.
综述了封闭型异氰酸酯树脂在水性涂料和电泳漆中的应用,包括树脂的类型、封闭剂的种类、催化剂以及涂料的组成与性能。
3.
A kind of complex anti-corrosive agent TF-469 for waterborne paint is developed.
开发了一种复合型水性涂料防腐剂,不含Ca2+,Mg2+,Cu2+,不会引起涂料结块沉淀。
5) waterborne coatings
水性涂料
1.
Research on the synthetic technology of polyurethane/acrylic hybrid emulsions used in waterborne coatings
水性涂料用聚氨酯/丙烯酸酯复合乳液合成技术的研究
2.
Spoilage of biocides will influence its performance of preservation during the storage of waterborne coatings.
水性涂料贮存过程中防腐杀菌剂的损耗将影响其防腐性能。
3.
The negative effects of coating containing volatile organic compound on the environment and creative were discussed,the research progress in studies on several green coatings,such as waterborne coatings,powder coatings and high solid coatings were introduced.
绿色涂料也称为环境友好涂料,讨论了含有有机挥发物的涂料对环境和生物的危害,着重介绍了几类绿色涂料的研究进展,如水性涂料、粉末涂料、高固体分涂料。
6) elasticity plastic filler
弹性填料
1.
The biofilm process using a new-type elasticity plastic filler was adopted in a typical polluted stream entering the Tai Lake(the Linzhuanggang).
利用新型弹性填料作为生物膜载体,将其直接布置在林庄港河道中,研究在不影响河流生态系统结构和使用功能的前提下,弹性填料对河流微污染水体的强化净化效果。
2.
The application efficiency of two kinds of elasticity plastic fillers, hydrophilic filler and hydrophobic filler in wastewater treatment process were studied.
通过比较普通塑料弹性填料与亲水性改进后的塑料弹性填料在污水生化处理中的应用效果发现 :亲水性改进的塑料弹性填料在污水的厌氧生化处理中可提高污水处理效率 15 %— 30 % ,在好氧生化处理中可提高污水处理效率5 %— 10 % ,且亲水性改进大大提高了塑料弹性填料的挂膜速度。
3.
Two kinds of elasticity plastic fillers were studied by water treatment process in this paper,one is hydrophilic filler,the other is hydrophobic filler.
填料表面的亲水性改进了微生物在其表面的吸附能力 ,新型填料与普通填料实验室的应用对比研究结果表明 :亲水性改进的弹性填料在污水的厌氧处理中可提高污水的厌氧处理效率 1 5%～ 30 % ,且亲水性改进大大提高了弹性填料的抗冲击负荷能力 ,此填料的工业应用结果也表明亲水性提高了填料的应用性能。
补充资料：散料性固体料面计
分子式：
分子量：
CAS号：
性质：料面计的一类。用于测量料斗内的颗料状物料的料面。按其功用一般可分为确定料面位置的料面测量器和测出料面极限值（最高的、最低的、正常的）并给出讯号的极限料面讯号器两种。应用于工业上，如煤气发生炉、高炉、石灰窑、储槽、仓库等的散粒性固体料面的测量。
分子量：
CAS号：
性质：料面计的一类。用于测量料斗内的颗料状物料的料面。按其功用一般可分为确定料面位置的料面测量器和测出料面极限值（最高的、最低的、正常的）并给出讯号的极限料面讯号器两种。应用于工业上，如煤气发生炉、高炉、石灰窑、储槽、仓库等的散粒性固体料面的测量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条