1) Ti-pillared montmorillonite
钛交联蒙脱土
1.
Mesoporous Ti-pillared montmorillonite was prepared by employing a Sol-Gel method, and then was modified by SO42- and CeO2 respectively.
采用溶胶凝胶法制备介孔钛交联蒙脱土,再采用SO42-和CeO2进行两次改性,然后以之为载体,制备铜基交联蒙脱土介孔固体酸催化剂。
2) pillared montmorillonite
交联蒙脱土
1.
Raw montmorillonite was pillared by Al-polycation,AlCe-polycation and AlY-polycation to prepare pillared montmorillonites(PILC)namely Al-PILC,AlCe-PILC and AlY-PILC,which were characterized by means of XRD and FTIR.
将蒙脱土原土分别与Al-交联剂、AlCe-交联剂、AlY-交联剂反应,制得交联蒙脱土Al-PILC,AlCe-PILC,AlY-PILC,用X射线衍射和红外光谱对产物进行表征。
2.
In this work,polyoxychromium pillared montmorillonites(Cr-Mt)have been synthesized by ion exchange method with Na-montmorillonite and characteri-zed by a series of physical-chemical methods.
本文以钠型蒙脱土（Ｎａ－Ｍｔ）为原料，以羟基铬聚合阳离子为交联剂制备出羟基铬交联蒙脱土（Ｃｒ－Ｍｔ）并对其物化性能进行研究。
3) cross-linked montmorillonite
交联蒙脱土
1.
Synthesis of cyclohexanone glycol ketal catalyzed by Al-cross-linked montmorillonite;
铝交联蒙脱土催化合成环己酮乙二醇缩酮
2.
Synthesis of acetals and ketals over Al/Zn-cross-linked montmorillonite catalyst
酸化铝锌复合交联蒙脱土催化合成缩酮和缩醛
4) Titanium cross-linked montmorillonite
钛交联蒙脱石
1.
According to the roles played by each composition in cosmetic, a range of functions of titanium cross-linked montmorillonite such as sun-screening, moisture retention, de-odorization and thickening are described when it is applied in cosmetics.
通过钛交联蒙脱石的各个成分在化妆品中所起的作用,论述了钛交联蒙脱石纳米复合材料在化妆品应用中具有防晒、保湿、去除异味、增稠等多种功效,比单独使用TiO2 和蒙脱石具有更大的优越性。
5) acid-treated cross-linked montmorillonite
酸化交联蒙脱土
1.
Cross-linked montmorillonite and acid-treated cross-linked montmorillonite was characterized by means of XRD,SEM and BET.
用合成的酸化交联蒙脱土作催化剂,以正丁醇和冰醋酸直接酯化合成乙酸丁酯,用正交试验方法探索了合成的较佳工艺条件,结果表明,当酸化浓度为15%时,催化活性最高,当n(醇)∶n(酸)=1∶1。
6) hydroxyl-aluminium cross-linked montmorillonite
铝交联蒙脱土
1.
Factors influencing the structure of hydroxyl-aluminium cross-linked montmorillonite;
铝交联蒙脱土结构影响因素的研究
补充资料：OL-T999钛酸酯偶联剂
简称TTS，相应的国外牌号KR-TTS，化学名称为三异硬脂酰基钛酸异丙酯，分子量956。红棕色油状 液体，相对密度0.9897，闪点179℃，粘度164．5mPa·s．LD5030000mg/kg。
适用于环氧树脂、聚氨酯、聚乙(丙)烯、PVC等树脂和碳酸钙、滑石粉、二氧化钛、水合氧化铝、石墨等填料。参考用量0.1%～0.15％。贮存于阴凉、通风、干燥的库房内。
适用于环氧树脂、聚氨酯、聚乙(丙)烯、PVC等树脂和碳酸钙、滑石粉、二氧化钛、水合氧化铝、石墨等填料。参考用量0.1%～0.15％。贮存于阴凉、通风、干燥的库房内。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条