1) Cold working
冷加工
1.
Microstructure change of AISI304 stainless steel in the course of cold working;
AISI304不锈钢在冷加工过程中的微观组织变化
2.
The effect of cold working on the austenitic boiler tubes operated at high temperature;
冷加工对高温运行奥氏体锅炉管的影响
3.
The results show that chemical composition design of the Q175 cold-drawn wire with the low carbon and low silicon is reasonable and the product quality,properties may well satisfy the need of wire drawing and cold working for the entersprises of the hardware products,for example,the stationery and so on.
介绍了低碳低硅冷加工用拉丝线材的化学成分、生产工艺设计及新产品开发。
2) cold forming
冷加工
1.
The reason, danger and the measures to eliminate the magnetism of austenitic stainless heads caused in cold forming process were introduced.
介绍了奥氏体不锈钢封头经冷加工后产生磁性的原因、危害以及解决措施。
2.
This paper introduces how to overcome the influence of block deformation of diesel engine on manufacturing accuracy to using casting and cold forming process improve the manufacturing accuracy of diesel engine block.
介绍如何采用铸造、冷加工工艺手段 ,克服柴油发动机机体变形对加工精度的影响 ,以提高柴油发动机机体的加工精度。
3.
The design scheme with design principle and calculation for cold forming process and different die shape are researched in this study.
介绍了一种新的T铁冷加工成形工艺,采用该新工艺减少了传统生产工艺中必须进行的退火软化、喷砂处理、磷化等多道繁琐环节,可实现连续作业,大大缩短了T铁生产周期,并在一定程度上提高了产品品质,降低了生产成本。
3) cold work
冷加工
1.
The influence of some processing factors such as cold work and heat treatment on the susceptibility to caustic stress corrosion cracking (SCC) of modified alloy 800, referred to alloy 800M, in a boiling solution of 50%NaOH+0.
通过显微组织检验、拉伸试验、应力分析、C形环应力腐蚀试验、俄歇电子能谱(AES)分析、腐蚀形貌观察,研究了某些加工因素(冷加工和热处理)对国产改性800合金(800M)在沸腾的50%NaOH+0。
2.
The microstructure and fracture surface of wire rod and steel wire were examined by optical microscopy and SEM The effect of inclusions on the ductility of wire rod before and after cold work was discussed As a result,it is the oxide inclusion that leads to rapid deterioration of wire rod ductility after cold wor
利用光学金相和扫描电镜对线材和钢丝的组织与断口进行了检验，讨论了线材冷加工前后夹杂对其塑性的影响。
4) Cold processing
冷加工
1.
It is the tendency that the seamless stainless steel pipes/tubes will be replaced by welded stainless steel for low - medium pressure boiler and heat - exchanger, after cold processing of automatic welding pipes/tubes controlled by computer in particular, the relevant properties is up to index of.
不锈钢焊接钢管在中低压锅炉及热交换器上替代不锈钢无缝钢管已势在必行,特别是计算机控制自动焊接钢管经冷加工处理后,其性能已达到无缝钢管的指标, 部分指标甚至优于无缝钢管(如钢管的表面质量、壁厚的均匀度等)。
5) cold-work
冷加工
1.
The relations between the properties and the composition parameters of the multifunctional titanium alloy,Gum Metal,the change of its cold-worked microstructure and probable plastic deformation mechanism,are briefly introduced.
简要介绍了多功能钛合金“橡胶金属”的特性与合金组成参数间的关系、冷加工金属组织的变化以及可能的塑性变形机制。
2.
It was found that a cold-work internal friction peak (CWIFP) appeared before T, transition.
用粘弹谱仪方法分析非晶态高聚物聚氯乙烯(PVC)冷加工效应所引起内耗峰,并用DSC差热分析方法观察不同的冷加工方式对冷加工内托峰的影响,得出一个用冷加工内耗峰初步判断冷加工过程中非晶态高聚物分子链段末端距方均根分布的变化趋势。
6) cold working
冷作，冷加工
补充资料：冷加工
| 冷加工 cold processing of metal 通常指金属的切削加工，即用切削工具从金属材料（毛坯）或工件上切除多余的金属层，从而使工件获得具有一定形状、尺寸精度和表面粗糙度的加工方法。如车削、钻削、铣削、刨削、磨削、拉削等。在金属工艺学中，与热加工相对应，冷加工则指在低于再结晶温度下使金属产生塑性变形的加工工艺，如冷轧、冷拔、冷锻、冲压、冷挤压等。冷加工变形抗力大，在使金属成形的同时，可以利用加工硬化提高工件的硬度和强度。冷加工适于加工截面尺寸小，加工尺寸和表面粗糙度要求较高的金属零件。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条