1) FGH95 alloy powder
FGH95合金粉末
1.
Non-equilibrium solute partition of rapidly solidified FGH95 alloy powder;
快速凝固FGH95合金粉末的非平衡溶质分配
2.
Analysis of efficient during water elutriation process of separating ceramic inclusions from FGH95 alloy powder;
分离FGH95合金粉末中陶瓷夹杂物的水淘析法有效性分析
3.
The results indicate that the geometry integrity of metastable MC type carbide in rapidly solidified FGH95 alloy powders changed from regular morphology .
结果表明:快速凝固FGH95合金粉末中亚稳MC型碳化物形态的几何完整度随粉末颗粒尺寸减小由规则形态向复杂形态变化,不同尺寸粉末颗粒中碳化物的形态和数量决定于凝固过程中热学参数的变化和非平衡溶质分配系数的不同。
2) FGH95 powder nickel-base superalloy
FGH95粉末镍基合金
1.
By means of the measurement of creep curves and microstructure observation,an investigation has been made into the creep behaviors and deformation features of FGH95 powder nickel-base superalloy.
通过蠕变曲线的测定及组织形貌的观察,研究了FGH95粉末镍基合金的蠕变行为及变形特征。
2.
By means of the measurement of creep curves and microstructure observation,an investigation has been made into the microstructure and creep behaviors of FGH95 powder nickel-base superalloy.
通过进行蠕变曲线测定和组织形貌观察,研究了FGH95粉末镍基合金的微观组织结构与蠕变行为。
3) FGH95 superalloy powders
FGH95高温合金粉末
1.
Carbide and its stability in FGH95 superalloy powders during rapid solidification;
对快速凝固FGH95高温合金粉末中的碳化物及其稳定性进行实验研究,分析了粉末颗粒凝固过程中的热学参数和非平衡溶质分配对碳化物形成过程的影响。
4) FGH95 superalloy powder
FGH95高温合金粉末
1.
Pre-heat treatment of PREP FGH95 superalloy powders;
等离子旋转电极雾化FGH95高温合金粉末的预热处理
2.
The microstructure characteristics of FGH95 superalloy powders prepared by plasma rotating electrode processing (PREP) have been investigated by using SEM.
对等离子旋转电极雾化(PREP)FGH95高温合金粉末颗粒凝固组织特征进行研究,并用数值分析方法计算了FGH95合金粉末凝固过程中冷却速率与粉末粒度之间的关系,结果表明:粉末颗粒表面凝固组织主要是树枝晶和胞状长大晶,随着粉末颗粒尺寸的减小,内部凝固组织由树枝晶为主逐渐转变为以胞状晶及微晶组织为主,冷却速率与粉末粒度之间的关系为T=2。
3.
In order to investigate the relation between microstructure of superalloy powders and the heat treatment system, this paper studied the transformation of carbides in FGH95 superalloy powders prepared by plasma rotating electrode processing (PREP) under different pre-heating treatment temperature.
对等离子旋转电极雾化(PREP)FGH95高温合金粉末颗粒在不同温度下进行预热处理,并对热处理粉末中碳化物的变化规律进行分析,结果表明:经预热处理,粉末颗粒中的MC’型亚稳碳化物发生分解和转变,析出稳定的MC,M_(23)C_6及M_6C型碳化物,明显改变碳化物的稳定性和分布状态。
5) PM FGH95
FGH95粉末高温合金
1.
Experimental Studies on Influence of Strain Rate and Temperature on the Plastic Deformation Performance of PM FGH95;
应变率及温度对FGH95粉末高温合金塑性变形性能影响的实验研究
6) nickel-base powder metallurgy superalloy FGH95
镍基粉末冶金FGH95合金
补充资料：超音速气体雾化快凝A1-Li合金粉末及其板材和棒材
超音速气体雾化快凝A1-Li合金粉末及其板材和棒材
超音：《气体霉化快凝A1．L1合金衍柬及}扳材和摔材
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条