说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 型腔成型
1)  cavity moulding?
型腔成型
2)  mold cavity
型腔
1.
DS53 steel is used to manufacture the shape-pressing die via the method of powder metallurgy where the mold cavity of the die is machined by electric spark machining.
DC53钢用于制作粉未冶金压坏模具,用电火花加工模具型腔,由于电参数不佳和冷却不充分,在型腔表面产生很厚的白亮层,导致模具早期疲劳破裂。
2.
Through analyzing molding technic of the insulation trail cover, we confirmed the mold structure with the semi open mold cavity, the subsection molding three-parting surface.
通过对绝缘尾罩的工艺分析,确定了半开放型腔、分段成型、三个分型面的模具结构。
3.
In order to ensure requirement of taper and size in machining complex mold cavity,it must depend on precision and reliable programming method of WEDM machine.
为使复杂型腔能在加工中保证锥度及尺寸要求,必须以线切割机床的精度和可靠的编程方法为前提。
3)  cavity [英]['kævəti]  [美]['kævətɪ]
型腔
1.
Pro/ E based mold cavity design with complex parting surface;
基于Pro/E复杂分型面的模具型腔设计
2.
Electrochemical Machining Technology for Cavity of Forging Dies;
锻模型腔的电解加工技术
3.
High speed milling process of the mold cavity for the cell phone top cover based on Cimatron E;
基于Cimatron E的手机上盖型腔高速铣削加工
4)  pocket [英]['pɔkɪt]  [美]['pɑkɪt]
型腔
1.
An Optimized Algorithm Based on the Shortest Path of Tool Path in Complex Pocket
最短路优化的复杂型腔刀具轨迹规划算法
2.
Conventional direction-parallel and contour-parallel tool path patterns are inapplicable for high speed pocket milling because of sharp turning corners.
针对传统行切、环切刀轨存在方向突变的拐角,不适用于型腔快速铣削的问题,提出一种新的刀轨生成算法。
3.
In NC programming of pocketing operation with contour parallel strategy, the reasonable positioning of the pre drilled holes and tool path planing remarkably affect programming effectiveness and cutting efficiency.
在运用环切方式进行型腔类零件的分层加工时 ,预钻孔位置和刀具运动轨迹规划直接影响编程的繁简及切削效率。
5)  mould cavity
型腔
1.
This paper introduces the technique of manufacturing the complicated mould cavity by using the superplasticity of metal.
利用金属的超塑性成形技术制造用一般常规加工方法难以加工的复杂盲孔型腔,具有工艺简单、制模周期短、成本低,轮廓清晰、表面光洁等优点。
2.
This paper introduces the technology, principles and the method of automatic NC programme with figures interactive, and discusses the methods and steps to actualize automatic NC programme of complicated gear extrusion mould cavity surface.
针对齿轮挤压成形的复杂型腔曲面,讨论图形交互自动数控编程的实现方法和步骤,该方法对实现复杂形状零件的高精度加工具有十分重要的意义。
6)  internal mold
型腔
1.
It accounts the application of its three-dimension technology in the pump shell and impeller as well as spring ,and illustrates the use of the series table of hardware, especially, the shaping of complex internal mold by match design and mold .
本文主要论述了机械CAD的过程,SolidWorks软件的功能和SolidWorks三维造型技术在泵体涡壳、叶轮、弹簧造型上的应用以及利用系列零件设计表形成标准件方面的应用,尤其是利用型腔和装配体功能形成内腔复杂的零件。
2.
It introduces the optimum design in the large assembly, especially,the shaping of complex internal mold by match design and mold by examples.
主要论述参数化特征建模技术中特征、参数化的定义,应用SolidWorks三维造型技术的一些经验以及利用SolidWorks软件进行大型装配体优化设计的方法,通过实例介绍如何利用型腔和装配体功能生成内腔复杂的零件。
3.
This article introduces the application and situation of the CAD/CAM technology, and the character of the SolidWorks three dimension software as well as its application in complex internal mold hardware formed by the mould match technology.
介绍了CAD/CAM技术的现状和应用、SolidWorks三维造型软件的特点及其利用模具装配技术形成复杂型腔零件的方法。
补充资料:型腔分型面及浇注系统
一、 分型面:
分开模具能取出塑件的面,称作分型面,其它的面称作分离面或称分模面,注射模只有一个分型面。
分型面的方向尽量采用与注塑机开模是垂直方向,形状有平面,斜面,曲面。选择分型面的位置时,
〈1〉 分型面一般不取在装饰外表面或带圆弧的转角处
〈2〉 使塑件留在动模一边,利于脱模
〈3〉 将同心度要求高的同心部分放于分型面的同一侧,以保征同心度
〈4〉 轴芯机构要考虑轴芯距离
〈5〉 分型面作为主要排气面时,分型面设于料流的末端。
一般在分型面凹模一侧开设一条深 0.025 ~ 0.1mm 宽1.5~6 mm的排气槽。亦可以利用顶杆,型腔,型芯镶块排气
二、 浇注系统
浇注系统是指模具中从注射机喷嘴接触处到型腔为止的塑料熔体的流动通道。作用:〈1〉输送流体 〈2〉传递压力
〈一〉 浇注系统的组成及设计原则
1、 组成:由主流道,分流道,内浇口,冷料穴等结构组成。
2、 浇注系统的设计原则:
〈1〉 考虑塑料的流动性,保征流体流动顺利,快,不紊乱。
〈2〉 避免熔体正面冲出小直径型芯或脆弱的金属镶件。
〈3〉 一模多腔时,防止大小相差悬殊的制件放一模内。
〈4〉 进料口的位置和形状要结合塑件的形状和技术要求确定。
〈5〉 流道的进程要短,以减少成型周期及减少废料。
〈二〉 主流道设计
指喷嘴口起折分流道入口处止的一段,与喷嘴在一轴线上,料流方向不改变。
(1) 便于流道凝料从主流道衬套中拔出,主流道设计成圆锥形 。
7-15 锥角 =2°~ 4°粗糙度Ra≤0.63 与喷嘴对接处设计成半球形凹坑,球半径略大于喷嘴头半经。
(2) 主流道要求耐高温和摩擦,要求设计成可拆卸的衬套,以便选 用优质材料单独加工和热处理。
(3) 衬套大端高出定模端面 5~10mm ,并与注射机定模板的定位孔成间隙配合,起定位隙作用。
(4) 主流道衬套与塑料接触面较大时,由于腔体内反压力的作用使衬套易从模具中退出,可设计定住 。
(5) 直角式注射机中,主流道设计在分型面上,不需沿轴线上拔出凝料可设计成粗的圆柱形。
〈三〉 分流道设计
指塑料熔体从主流道进入多腔模各个型腔的通道,对熔体流动起分流转向作用,要求熔体压力和热量在分流道中损失小。
(1)分流道的截面形式:
a、 图形断面:比表面积小(流道表面积与其体积之比),热损失小,但加工制造难,直径 5~10mm
b、 梯形:加工较方便,其中h/D = 2/3 ~ 4/5 边斜度 5~15°
c、 u形:加工方便,h/R=5/4
d、 半圆形:h/R=0.9
(2) 分流道的断面尺寸要视塑件的大小,品种注射速度及分流道的长度而定。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条