1) uniform corrosion rate
均匀腐蚀速率
1.
The effect of environmental factors on CO_2 uniform corrosion rate and the establishment of predictive model;
环境因素对CO_2均匀腐蚀速率的影响及腐蚀速率预测模型的建立
2) general corrosion
均匀腐蚀
1.
Corrosion behaviors of austenite stainless steel 1Cr18Ni9Ti in sodium carbonate containing uranium were studied by electrochemical polarization and general corrosion methods.
用动电位极化法和均匀腐蚀法研究了奥氏体不锈钢 (1Cr18Ni9Ti)在含铀碳酸钠溶液中的腐蚀行为。
2.
5%-6% NaCl solutions and a similar general corrosion resistance in -0.
5mol／LH2SO4溶液中具有相当于原始不锈钢的耐均匀腐蚀性能。
3) Uniform Corrosion
均匀腐蚀
1.
Calculation on Remaining Life of Buried Crude Pipeline in Uniform Corrosion;
埋地输油管道均匀腐蚀剩余寿命计算
2.
Anti-uniform corrosion property of theses materials are measured under 270℃and 290℃.
本文选用压力容器常用钢——— 12CrMoV、2 0 g、16MnR三种材质 ,按照适于我国一水硬铝石型铝土矿的双流法溶出工艺条件 ,在铝土矿溶出实验用的钢弹中 ,测定了 2 70℃、2 90℃温度下三种材质的耐均匀腐蚀性。
3.
Under the water chemistry condition simulating pressurized water reactors(PWRs) coolant(temperature,345 ℃;B,800 mg/L;Li,2 mg/L), their stress corrosion and uniform corrosion behaviors are studied.
采用GB43 3 4 7 84和法国RCC MMC1 3 1 0对国产两种堆焊材料进行了点腐蚀、晶间腐蚀试验 ,在模拟压水堆核电站介质 (温度 3 45℃ ,80 0mg/LB ,2mg/LLi)条件下 ,研究了堆焊材料的应力腐蚀和均匀腐蚀性能。
4) CO_2 General Corrosion Rate Prediction Model
CO_2均匀腐蚀速率预测模型
5) Etch Rate Uniformity
刻蚀速率均匀性
6) average corrosion rate
平均腐蚀速率
1.
Comparative result shows that taking specimens\'average corrosion rate and corrosion depth for jeopardizing evaluation of pipeline local corrosion is unscientific Statistics of extremes could be applied to count soil corrosion of pipeline, which shall be used as a basis of the evaluation.
通过失重法计算其平均腐蚀速率、平均腐蚀深度及用极值法预测最大腐蚀坑深。
补充资料：不均匀腐蚀
分子式：
分子量：
CAS号：
性质：见局部腐蚀。
分子量：
CAS号：
性质：见局部腐蚀。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条