1) electrical erosion resistance
耐电蚀性
1.
Copper-graphite composite tool-electrode materials were fabricated by co-electroforming,and electrical erosion resistance of composite tool-electrode materials was studied experimentally.
通过复合电铸技术在耐电蚀性强的铜主体中引入抗电蚀性能优异的微粉石墨成功制备了铜-石墨复合电极材料,试验研究了复合电极材料的抗电蚀能力。
2) breakdown voltage
耐电压
1.
With the increase of pressure the room temperature resistivi ty follows on cap-type change, and the R-t Coefficient and the breakdown voltage decrease accordingly.
随着成型压力的增大，材料的室温电阻率呈倒“Ｕ”形变化，电阻温度系数及耐电压性能呈单调递减变化，通过回归分析建立了烧成收缩率与成型压力的关系。
3) corona-resistance
耐电晕
1.
The surface, morphology, structure, and performance of the composites before and after the experiment of corona-resistance was examined with atom force microscope (AFM) and was compared with KAPTON .
利用原子力显微镜(AFM)对PI/纳米SiO2复合材料与杜邦公司的KAPTON耐电晕复合材料及其电晕试验后的复合材料进行了表面形貌、结构和性能比较。
2.
The effect of SiO_(2) content and the morphology between the organic and inorganic phases on corona-resistance(CR) property was analyzed and discussed.
分析和讨论了无机成分的含量和两相间界面形态的变化对PI/S iO2薄膜耐电晕性能的影响。
3.
On the basis of the documents published home and broad,the synthesization and corona-resistance mechanism of the kind of material are overviewed.
采用耐电晕材料作为变频电机的漆包线绝缘是延长变频电机使用寿命的重要途径之一。
4) withstand voltage
耐电压
1.
The duplicate tests prove that the PTC magnet erasing components of thus acquired electrode possesses higher withstand voltage and capacity of AC over current.
重复试验证明 ,在该工艺条件下获得的以Ni镀层为底层电极的PTCR元件 ,其耐电压和耐工频电流冲击性能良好。
2.
Reliability is improved by rising withstand voltage.
对其耐电压性能的改进进行了研究 ,解决了影响产品可靠性水平的关键指标——耐压击穿问题。
5) corona resistant
耐电晕
1.
Study of corona resistant composite insulating material;
耐电晕复合绝缘材料的研究
2.
The domestic status of study and application in the field of corona resistant materials were summarized, and the problems and research emphasis were also pointed out.
分析了变频电机绝缘材料的工作环境和破坏机理,概述了耐电晕绝缘材料的研究及其在变频电机中的应用现状,讨论了我国在该领域存在的问题,提出了今后耐电晕绝缘材料的研究重点。
6) arc resistance
耐电弧性
1.
PET/GF composites with good arc resistance and flame retardance are prepared.
发现玻纤和溴-锑阻燃剂会降低PET复合材料的耐电弧性,但选择合适的增容剂可以提高阻燃剂粒子在PET树脂中的分散均匀性,提高了阻燃剂的作用效率,从而减小了阻燃剂的用量,使阻燃剂对材料耐电弧性的负面影响减小到最小。
参考词条
补充资料：耐电生胶
分子式：
CAS号：
性质：又称脱蛋白生胶或耐电生胶。采用三次离心浓缩的办法达到脱蛋白基本纯化的目的。因含蛋白和水溶性物质少，在大气中或在水中吸水少，因而具有更好的耐电性能，适于制造地下或海底电缆和高级医疗制品。
CAS号：
性质：又称脱蛋白生胶或耐电生胶。采用三次离心浓缩的办法达到脱蛋白基本纯化的目的。因含蛋白和水溶性物质少，在大气中或在水中吸水少，因而具有更好的耐电性能，适于制造地下或海底电缆和高级医疗制品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。