1) Inoculation
[英][i'nɔkju'leiʃən] [美][ɪn,ɑkjə'leʃən]
孕育处理
1.
Effects of SiFe75 Inoculation Treatment on the Microstructure and Properties of TiC_p/Fe Composites
孕育处理对TiC_p/Fe复合材料组织和性能的影响
2.
The core of the new manufacturing process for the high quality upgraded Manganese steel is fractionation modification,composite inoculation and microalloying technique,which are affected each other.
优质改性高锰钢生产新工艺的核心是将分级变质处理、复合孕育处理和微合金化技术三位一体,互为作用。
2) Inoculation treatment
孕育处理
1.
Effect of inoculation treatment on the low temperature graphitization of malleable cast iron;
孕育处理对可锻铸铁低温石墨化能力的影响
2.
The results indicated that,because of controlling of the chemical compositions and inoculation treatment were unsuitably given,so that some rough primary graphite presented itself wedge angle block structure,and strength and toughness of the body were seriously weakened,thus the body to fracture was caused.
结果表明,开裂的主要原因是由于化学成分的控制和铸造孕育处理不当,致使粗大的初生石墨呈尖角块状,对基体有严重的削弱作用,从而铸件脆性增大,强度下降,导致机体开裂。
3) modification
[英][,mɔdɪfɪ'keɪʃn] [美]['mɑdəfə'keʃən]
孕育处理
1.
Electric pulse was used to treat liquid P510L steel for modification and macrostructures.
用不同的脉冲电流对P510L钢进行了孕育处理,研究了不同的电脉冲参数对其宏观组织和微观组织的影响。
2.
The components,modification and graphitizing annealing technology of ductile cast iron as-cast was researched.
对铸态可锻铸铁的材质、孕育处理及石墨化退火工艺进行了研究。
3.
The results show that the morphology of carbides in high chromium cast irons improve visibly,the carbides change to rods and the microstructure become fined apparently,which implies that the modification has somewhat influence on the microstructure of high chromium cast irons.
对高铬白口铸铁进行了孕育处理,探讨了高铬白口铸铁组织中碳化物形态的变化特征。
4) EPM
电脉冲孕育处理
1.
Inoculation Fading of Electric Pulsed Modification (EPM) on Al-22Si Alloy;
电脉冲孕育处理Al-22Si合金衰退性的研究
2.
Effects of electric pulse magnetic field (EPM)on morphology and fracture of primary Si phase in KS282 alloy have been observed by SEM and DSC.
结果发现,电脉冲孕育处理对多元高硅铝合金有变质作用,增加了合金凝固过程的热力学过冷度,提高了初生硅相形核率。
3.
The effects of electric pulse modification(EPM) on the hot cracking tendency of Al-5Cu alloy have been investigated.
研究了不同电脉冲孕育处理参数对Al-5Cu合金热裂倾向的影响。
5) Electric pulse modification
电脉冲孕育处理
1.
Effects of electric pulse modification on aging process of AI-Cu-Mn alloy;
电脉冲孕育处理对Al-Cu-Mn合金时效过程的影响
2.
Effect of electric pulse modification on the structure and mechanical properties of Al-5%Cu-0.8%Mn alloy;
电脉冲孕育处理对Al-5%Cu-0.8%Mn合金组织及性能的影响
3.
Effects of electric pulse modification(EPM)parameters on aging process of AI-Cu-Mu alloy were investigated.
考察了不同电脉冲孕育处理参数对 Al-Cu-Mn 合金时效过程的影响,结果表明：电脉冲孕育处理加速了 Al-5%Cu-0。
6) Electric Pulse
电脉冲孕育处理
1.
Effect of electric pulse modification on the solidification structure of pure aluminum;
电脉冲孕育处理对纯铝凝固组织的影响
2.
Hereditary Characterization of Electric Pulse Modified Aluminum Melt;
通过对电脉冲孕育处理试样的重熔试验,研究了铝熔体在该条件下的遗传特征。
补充资料：孕育处理
inoculation：浇注以前，在一定条件下向液体合金中加入一定量的促进异质形核的固态物质，以改变铸造合金的凝固过程，改善结晶组织，从而提高铸造合金性能的处理方法。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条