说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 蜂窝夹层
1)  honeycomb sandwich
蜂窝夹层
1.
The paper mainly describes the construction characteristics,process and key manufacturing technology of the large double reflected antenna surface and has resolved the problems in making double reflected surface,moulding process of more layers of honeycomb sandwiches and posttreatment process.
解决了大口径曲面栅面的制作难题、多层蜂窝夹层结构的成型制造工艺及复杂结构天线的后处理工
2.
The compressive test is conducted for three forms of honeycomb sandwich laminates.
针对大展弦比机翼结构的特点,选定蜂窝夹层、多墙式和一种新型混合式结构进行分析比较。
3.
In this paper,the dynamic analysis of the carbon fiber honeycomb sandwich structure was deeply investigated.
 对碳纤维蜂窝夹层结构的动力学问题进行了深入分析。
2)  honeycomb sandwich panel
蜂窝夹层板
1.
of honeycomb sandwich panel ofcomposites only using a Three-point Bending Test has been proposed based ontheoretical deduction.
根据这一原理,得到一个简便、省时、易统计数据而且精度较高的复合材料蜂窝夹层板测试的刚度分离实验方法。
2.
This paper treats the honeycomb sandwich panel as a kind of orthotropic plate and applies it to the sheet space structure.
传统板片空间结构体系中的板片采用钢纤维增强复合板,文章将蜂窝夹层板等效成一块各向异性的单层板替代钢纤维板,分析了这种新型板片空间结构的静、动力特性,并进行了弹性时程分析,计算结果表明蜂窝板片结构体系具有刚度更大、自重更轻和动力性能更优越的特性,具有广阔的应用前景。
3.
The honeycomb sandwich panels have been widely used in the satellite structures, and the equivalent elastic constants for the sandwich panels directly influence the accuracy of computational results.
在利用 MSC/NASTRAN对卫星结构进行有限元计算时 ,必须对蜂窝夹层板进行预先的等效处理 ,等效处理的合理与否将直接影响到计算结果的可信度 。
3)  honeycomb sandwich plate
蜂窝夹层板
1.
A method of equivalent analysis for dynamics and statics behavior of honeycomb sandwich plates is obtained by using low\|order shear deformation theory.
本文基于低阶剪切理论 ,提出了正交各向异性蜂窝夹层板的一种等效分析方法 ,得到等效板的工程常数和密度 ,解决了国际上公认的大型有限元通用程序如 NASTRAN等不能直接计算蜂窝夹层板动、静力学问题的难题 ,理论验证结果表明 ,等效方法具有高精度的近似。
2.
In this paper, the Lagrange system for dynamic analysis of honeycomb sandwich plates is transferred to the Hamilton system.
蜂窝夹层板动力分析从Lagrange体系改换为Hamilton体系。
3.
Honeycomb sandwich plate has many advantages such as low density, high strength ratio and high stiffness ratio.
蜂窝夹层板具有低密度、高比强度、高比刚度以及可设计性等优点,在航空航天领域里广泛应用。
4)  honeycomb sandwich plates
蜂窝夹层板
1.
Compression properties of honeycomb sandwich plates with different shape delamination defects
含不同形状分层缺陷蜂窝夹层板的压缩性能
2.
Considering the effects of higher-order transverse shear deformation and transversal damping,we established the mathematical model of the honeycomb sandwich plates under the in-plane and transversal excitations.
研究了正六角形蜂窝夹层板的非线性动力学问题。
5)  honeycomb sandwich structure
蜂窝夹层结构
1.
Experimental study of the cocure process with the vacuum bag method for honeycomb sandwich structure;
蜂窝夹层结构真空袋共固化工艺过程实验研究
2.
Core crush of Nomex honeycomb sandwich structure during cocuring process with vacuum bag
Nomex蜂窝夹层结构真空袋共固化过程蜂窝变形
3.
The mechanical properties and process properties of SY-24B film adhesive using for bonding facing to core of honeycomb sandwich structure were presented in this paper, the mechanical properties of a two part paste adhesive SY-21 were also discussed for comparing.
介绍了蜂窝夹层结构用面板胶SY -2 4B胶膜的力学性及工艺性能 ,并将其与双组分糊状胶SY -2 1作对比。
6)  Nomex honeycomb sandwich construction
Nomex蜂窝夹层结构
1.
Through testing the mechanical properties of the Nomex honeycomb sandwich construction with different curing pressure, the effect of the curing pressure on the performance of sandwich constructions has been discussed.
通过测试不同固化压力下的Nomex蜂窝夹层结构的力学性能,讨论了固化压力对蜂窝夹层结构性能的影响。
补充资料:蜂窝夹层结构
分子式:
CAS号:

性质:由面板(蒙皮)与轻质蜂窝芯材通过胶黏剂粘接成的层状复合结构。夹层结构面板可以是铝板或者碳纤维、玻璃纤维、芳纶纤维复合材料板。常用的蜂窝芯材料为铝箔、芳纶纸、玻璃布和牛皮纸等。夹层结构的突出特点是:弯曲刚度大,可充分利用材料的强度,重量轻。蜂窝夹层结构可以一次成型即上下面板的成型固化和面板与蜂窝芯的胶接固化是同时完成的;也可以二次成型即上下面板的成型固化与面板芯材的胶接固化先后分两次固化;也可以三次成型,则是上面板固化、下面板固化和面板芯材胶接固化,先后分三次进行。铝板作面板时需要在胶接之前进行表面处理,以提高胶接强度。夹层结构在飞机上应用比较广泛,如翼面、舵面、舱面、壁、地板、雷达罩等,还可以用作火车、地铁、汽车上的各种隔板,用玻璃纤维复合材料或芳纶复合材料为蒙皮以铝蜂窝芯、芳纶纸蜂窝芯制造的赛艇、游船性能优异,另外在滑水板、冲浪板、滑雪板等体育用品方面也得到应用。厚型的粗蜂窝夹层结构可用作建筑墙板,隔音、隔热效果好。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条