1) carding cots
精梳胶辊
3) combing
[英]['kəumiŋ] [美]['komɪŋ]
精梳
1.
The present situation and its future development of yarn combing technology at home and abroad;
国内外精梳技术现状和发展展望
4) comb
[英][kəʊm] [美][kom]
精梳
1.
Development and Application of Non-disposed Comber Separator Top Roller NFR-W999;
精梳NFR-W999型不处理分离胶辊的研制与应用
2.
The material selection,processes,production technology and main technical measures were introduced to spin fine wool and combed cotton blended yarn,and the results of yarn quality test were clarified.
介绍了羊绒与精梳棉混纺的原料选择,工艺流程,生产工艺及关键技术措施,并阐明了成纱质量测试情况。
3.
In equal cotton assoring conditions,the yarn quality through single drawing of FA1302 drawing machine after combing was compared with that of double drawing of FA306 drawing machine and single drawing of RSB-D35C drawing machine.
3 tex纱时,就精梳后采用F1302型与FA306型两道并条机、RSB-D35C型并条机进行了对比试验,指出了使用该机的注意事项。
5) carding roller
分梳辊
1.
In order to improve the quality of the resultant yarn through rotor-spinning process,data analysis finds the effect of the carding roller,false twsiter navel,rotor cup on quality of the resultant yarn.
为了提高转杯纺纱工序的成纱质量,通过大量的试验数据分析,详细讨论了分梳辊、假捻盘、转杯对成纱质量的影响,指出:分梳辊主要影响纤维分离度,从而影响成纱强力、条干和粗、细节;假捻盘具有假捻效应,主要有利于提高动态强力,降低成纱断头,稳定生产,但不利于提高成纱强力;转杯转速与直径的配置是关键,速度、直径和凝聚槽形状直接影响成纱质量。
2.
In order to upgrade the wear-resistance of rotor spinning elements,the experiment is done to the vapor deposition for diamond-like coating on the tooth rings of the carding roller.
为提高转杯纺纺纱元件的耐磨性,做了分梳辊齿环气相沉积镀类金刚石涂层(DLC)试验,结果证明,类金刚石膜硬度可以达到1500 HV~2 000 HV;摩擦系数为0。
6) opening roll
分梳辊
1.
To get wool30/acrylic70 rotor spun yarn with better properties,elements of rotor spinning machine(opening roll,navel) are chosen and the processing parameters(speed of rotor,speed of opening roll and twist multiplier) are optimized.
文章以毛30/腈70混纺纱为研究对象,应用模糊决策和模糊聚类方法对不同型号和组合的纺纱元器件(分梳辊、假捻盘)进行优选,选出适用的纺纱元器件,在此基础上应用通用旋转组合设计研究了有关工艺参数(转杯速度、分梳辊速度和捻系数)与成纱质量(条干、细节、粗节、毛羽、毛粒、断裂强度、强度不匀、断裂伸长、伸长不匀和最小捻度)之间的关系,得到了最优工艺参数,在现有条件下,纺制出了综合质量较好的毛/腈转杯混纺纱。
2.
The specification parameters and type of the opening roll and the navel used in the rotor spinning of native micro-polyester fiber (0.
89 dtex×38mm)转杯纺进行了分梳辊、假捻盘型式及规格的对比分析。
补充资料：纺纱牵伸胶辊胶管
分子式：
CAS号：
性质：又称纺纱皮辊胶管。用于棉纺、化纤纺、棉及化纤混纺等纺纱机的牵伸。为中空管状纯橡胶制品。经混炼、挤出、成型、硫化等工序加工制成。分并条胶辊胶管、精梳胶辊胶管、粗纱胶辊胶管及细纱胶辊胶管。产品具有高硬度(邵尔A80度)、良好的动态性能、耐磨性和抗静电性。
CAS号：
性质：又称纺纱皮辊胶管。用于棉纺、化纤纺、棉及化纤混纺等纺纱机的牵伸。为中空管状纯橡胶制品。经混炼、挤出、成型、硫化等工序加工制成。分并条胶辊胶管、精梳胶辊胶管、粗纱胶辊胶管及细纱胶辊胶管。产品具有高硬度(邵尔A80度)、良好的动态性能、耐磨性和抗静电性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条