1) seeded emulsion copolymerization
种子乳液共聚合
2) unseeded emulsion copolymerization
无种子乳液共聚合
1.
By solution to the model established above, it is shown that miscelle nucleation is much more important than homogeneous nucleation for the unseeded emulsion copolymerization of vinyl acetate(VAc) and methyl methacrylate(MMA).
建立了ＶＡｃ／ＭＭＡ半连续无种子乳液共聚合数学模型。
3) Seeded emulsion polymerization
种子乳液聚合
1.
Synthesis of MCPU-PMMA hybrid emulsion through seeded emulsion polymerization;
种子乳液聚合制备MCPU-PMMA复合乳液
2.
Free radical seeded emulsion polymerization with participation of hydrolysis-condensation reaction(Ⅱ) Parameters and modeling application;
伴有水解缩合反应的种子乳液聚合动力学(Ⅱ) 参数求解和模型应用
3.
The highly cross-linked solid and hollow polymer particles which are poly(methyl methacrylate-co-divinylbenzene) were prepared by means of a seeded emulsion polymerization.
以种子乳液聚合法制备出具有空心结构的交联型乳胶粒,以低分子量的PS为种子,以MMA和DVB为壳单体对种子乳粒在高温下溶胀,由于种子聚合物和壳层聚合物之间相容性的不同,导致在壳层聚合时两者之间发生相分离,并在粒子内部产生空心结构。
4) seed emulsion polymerization
种子乳液聚合
1.
The results showed that the seed emulsion polymerization of styrene and butadiene in the presence of small size seed and batch addition of emulsifiers was a more(effective) route to synthesi.
采用种子乳液聚合法制备了丁苯共聚物/水泥复合材料专用丁苯胶乳,考察了复合乳化剂体系、种子胶乳用量、极性单体种类、聚合温度及加料方式等对乳胶粒尺寸及其分布和胶乳稳定性等的影响。
2.
Acrylic emulsion with core-shell structure,which can be used as the leather emulsion finishing agent,has been synthesized by use of pre-emulsion and seed emulsion polymerization technology.
采用预乳化工艺和种子乳液聚合的方法,合成了具有核壳结构的皮革用丙烯酸酯乳液。
3.
Multilayer latex particles with carboxylic polymer as core,polymer with low glass transition temperature and film-formable under room temperature as shell,and lightly crosslinked polymer as intermediate layer were prepared with unsaturated carboxylic monomers by multistage seed emulsion polymerization.
采用羧基单体进行多阶段的种子乳液聚合,制备了内核为带羧基的聚合物、最外层为易成膜的低玻璃化温度聚合物、中间为轻度交联中间隔离层的多层核壳结构乳胶粒,最后通过碱处理制成了具有室温成膜性的中空结构聚合物微粒。
5) seed-emulsion polymerization
种子乳液聚合
1.
Core/shell composite microparticles with silica nanoparticle as core and crosslinked poly(tert-butylmethacrylate) as shell were prepared by seed-emulsion polymerization utilizing 3-(trimethoxysilyl)propyl methacrylate(MPS) modified silica particles as seeds,tert-butylmethacrylate as monomer and sodium dodecyl sulfate(SDS) as emulsifier.
以甲基丙烯酸-3-(三甲氧基硅基)丙酯(MPS)修饰的SiO2胶体粒子为种子,甲基丙烯酸叔丁酯(tBMA)为单体、十二烷基硫酸钠(SDS)为乳化剂,采用种子乳液聚合法制备了SiO2/聚甲基丙烯酸叔丁酯的核壳复合微粒。
2.
The latex particles of St-BA/St-MMAVinylTriethoxylsilane core-shell structure were prepared by seed-emulsion polymerization and the properties of the emulsions and latex films were investigated.
通过种子乳液聚合法制备了以丙烯酸丁酯(BA)-苯乙烯(S t)共聚物为核,甲基丙烯酸甲酯(MM A)-苯乙烯(S t)-乙烯基三乙氧基硅烷(VTES)为壳的水性自交联乳液。
6) seeding emulsion polymerization
种子乳液聚合
1.
Effect of AC on seeding emulsion polymerization using St or MMA as shell monomer;
AC对St或MMA为壳层单体种子乳液聚合的影响
2.
Polybutyl acrylate(PBA)latex with large particle size was prepared by seeding emulsion polymerization.
采用种子乳液聚合法制备了丙烯酸酯-苯乙烯-丙烯腈共聚物生产工艺中的基础胶乳聚丙烯酸丁酯(PBA),考察了配方和工艺条件对其粒径增大的影响。
3.
The cationic and anionic emulsions of fluorine-modified silicon-acrylate were prepared through seeding emulsion polymerization.
采用种子乳液聚合方法制备了阴、阳离子型氟改性硅丙乳液,用红外光谱对聚合物进行了表征,考察了聚合温度、氟改性单体和种子乳液的用量、乳化剂用量和pH值等因素对转化率和聚合物膜与水之间接触角的影响。
补充资料：共种子
【共种子】
（术语）又曰共相种子。对于不共种子而言。生自他共变之境之识变种子也。自此种子而生之境，有自他共得受用者与不然者之别。
（术语）又曰共相种子。对于不共种子而言。生自他共变之境之识变种子也。自此种子而生之境，有自他共得受用者与不然者之别。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条