1) thermal influence zone
热力影响区
1.
Determination of the thermal influence zone of buried hot oil pipeline on steady operation;
埋地热油管道稳定运行条件下热力影响区的确定
2) heat affected zone
热影响区
1.
Grain refinement of heat affected zone of high strength low alloy steel by large heat input welding;
大热输入焊接高强度低合金钢热影响区的晶粒细化
2.
Thermal simulation experiments of welding heat affected zone of 2.25Cr-1Mo-0.25V heat resistance steel;
2.25Cr-1 Mo-0.25V耐热钢焊接热影响区热模拟试验研究
3.
Effects of immediate water cooling and normalization after welding on microstructure and hardness of heat affected zone of ultra-fine grain steels welded joint;
紧急水冷及焊后正火对超细晶粒钢接头热影响区组织与硬度的影响
3) heat affected zone(HAZ)
热影响区
1.
The results show that the grain size grows up obviously in the heat affected zone(HAZ)of all the arc welded joints,the mechanical properties of the arc welded joints by manual arc welding and submerged arc welding.
结果表明,400MPa级超细晶粒钢电弧焊焊接接头热影响区存在着明显的晶粒长大现象;手工电弧焊和埋弧焊焊接接头性能明显下降,而二氧化碳气体保护焊焊接接头性能下降不明显。
4) HAZ
热影响区
1.
Crystalline Grain Size in HAZ of Ultra Fine Grain Steel at Different Parameters;
不同参数下超级钢焊接热影响区晶粒尺寸
2.
THE HAZ STRUCTURE AND PROPERTIES OF ULTRA-FINE GRAINED STEEL COMPOSED OF Nb;
含铌细晶粒钢的热影响区组织性能
3.
Toughness Distributions of Different Area on HAZ of Grade X80 Pipeline Steel;
X80级管线钢焊接热影响区不同区域的韧性分布
5) heat-affected zone
热影响区
1.
Microstructure of the Fe-based coating by plasma cladding and characteristics of its heat-affected zone;
等离子熔覆铁基涂层组织结构及热影响区特点
2.
Laser welding of high nitrogen steel 1Cr22Mn16N Ⅲ.Microstructure and mechanical properties of welding heat-affected zone;
1Cr22Mn16N高氮钢的激光焊接Ⅲ.焊接热影响区组织和性能
3.
Microstructures and properties of simulated heat-affected zones of 06CuNiCrMoNb age hardening steel;
06CuNiCrMoNb时效硬化型钢模拟焊接热影响区的组织和性能
6) heat affected zone (HAZ)
热影响区
1.
The strengthening and toughening mechanism of heat affected zone (HAZ) of a high property pressure vessel steel--610MPa grade high heat input welding steel with low susceptibility to welding crack was investigated in this paper by using welding thermal simulation technology.
利用焊接热模拟技术对一种 6 10MPa级大线能量低焊接裂纹敏感性钢的热影响区 (HAZ)强韧化机理进行了研究。
2.
The results show that the grain size grows up obviously in the heat affected zone (HAZ) of all the arc welded joints, the mechanical properties of the arc welded joints by manual arc welding and submerged arc weld.
研究结果表明:400MPa级超细晶粒钢电弧焊焊接接头热影响区存在着明显的晶粒长大现象;手工电弧焊和埋弧焊焊接接头性能明显下降,而二氧化碳气体保护焊焊接接头性能下降不明显。
补充资料：热力学：热力学第零定律
热力学第零定律:
热力学中以热平衡概念为基础对温度作出定义的定律。通常表述为﹕与第三个系统处於热平衡状态的两个系统之间﹐必定处於热平衡状态。图中A 热力学第零定律示意图
﹑B 热力学第零定律示意图 ﹑C 热力学第零定律示意图 为 3个质量和组成固定﹐且与外界完全隔绝的热力系统。将其中的B ﹑C 用绝热壁隔开﹐同时使它们分别与A 发生热接触。待A 与B 和A 与C 都达到热平衡时﹐再使B 与C 发生热接触。这时B 和C 的热力状态不再变化﹐这表明它们之间在热性质方面也已达到平衡。第零定律表明﹐一切互为热平衡的系统具有一个数值上相等的共同的宏观性质──温度。温度计所以能够测定物体温度正是依据这个原理。
热力学中以热平衡概念为基础对温度作出定义的定律。通常表述为﹕与第三个系统处於热平衡状态的两个系统之间﹐必定处於热平衡状态。图中A 热力学第零定律示意图
﹑B 热力学第零定律示意图 ﹑C 热力学第零定律示意图 为 3个质量和组成固定﹐且与外界完全隔绝的热力系统。将其中的B ﹑C 用绝热壁隔开﹐同时使它们分别与A 发生热接触。待A 与B 和A 与C 都达到热平衡时﹐再使B 与C 发生热接触。这时B 和C 的热力状态不再变化﹐这表明它们之间在热性质方面也已达到平衡。第零定律表明﹐一切互为热平衡的系统具有一个数值上相等的共同的宏观性质──温度。温度计所以能够测定物体温度正是依据这个原理。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条