1) magnetic wearing material
磁性耐磨
1.
The wear-resistance principle of the magnetic wearing material is that ‘protective cover’was formed between itself and iron-bearing material utilizing the magnetism of materials to avoid the wear of equipment.
磁性耐磨材料的抗磨原理是在自身与含铁物料之间形成一层“保护膜” ,从而避免材料的磨损。
2) Waterproof and Wearproof
耐水耐磨性
1.
Study on Waterproof and Wearproof of Diaze Sensitized Emulsion;
重氮感光胶耐水耐磨性的研究
3) wear resistant
耐磨的;耐磨性
4) wear resistance
耐磨性能
1.
Investigations of wear resistance after Supersonic Particles Bombarding in Cr-Zr-Cu surface;
超音速颗粒轰击铬锆铜表面耐磨性能的研究
2.
Experimental study of wear resistance of nickel based WC composite coating prepared by flame spraying and remelting+;
火焰喷涂重熔Ni基WC复合涂层的耐磨性能试验研究
3.
Microstructure and wear resistance of laser clad TiC+Ti and TiC+NiCrBSi composite layers on Ti-6Al-4V alloy;
TC4钛合金激光熔覆TiC+M涂层组织和耐磨性能研究
5) wear resistance
耐磨性
1.
Study on preparation and wear resistance of nano- Al_2O_3 ceramic coatings on magnesium alloy;
镁合金表面纳米Al_2O_3陶瓷涂层的制备及耐磨性研究
2.
The effect of laser smoothing on morphology and wear resistance of laser-nitrided titanium alloy;
激光整平对钛合金激光氮化表面形态和耐磨性的影响
3.
Wear Resistance of In-situ Synthesized Fe Matrix Composites;
原位自生钢基复合材料耐磨性能的研究
6) abrasion resistance
耐磨性
1.
Application of diamond bits with improved abrasion resistance in gravel formation drilling;
强化耐磨性钻头在卵砾石地层中的应用研究
2.
The abrasion resistance of screw pump's stator in heavy oil sand-carrying cold production will be improved by adding zinc oxide whiskers;
用氧化锌晶须改善稠油冷采中螺杆泵定子的耐磨性能
3.
Study on adhesion and abrasion resistance of UV curable coatings for handset;
紫外光固化手机涂料附着力和耐磨性的研究
补充资料：磁性材料2．薄膜磁性材料
磁性材料2．薄膜磁性材料
Magnetie Materials 2.Thin Film
在一定外加磁场作用下，其反磁化畴(磁矩取向与外磁场方向相反的畴)变为圆柱形磁畴。从膜面上看，这些柱形畴好像浮着的一群圆泡，故称磁泡或叫泡踌(另见磁性材料2.昨晶态磁性材料)。在特定的电路图形、电流方向和一定磁场情况下，可做到控制材料中磁泡的产生、传翰和消失，实现信息的储存和逻辑运算的功能。磁泡的直径在微米量级(0 .5~5协m)，每个磁泡的迁移率在1 .26~12.6em八s·A/m)〔 102一i03cm八s·oe)〕，因而可制成存储密度为兆位/cmZ(Mbit/cmZ)和数据处理速率为兆位/s(M肠t/s)的运算器件。磁泡器件经过近20年研究和开发，已取得广泛的实际应用。 对磁泡材料的主要要求是:(l)各向异性常数凡>粤斌，磁化强度从>外磁场强度H;(2)杂质缺陷小，2一~”~’.J泌~-一‘产’~~一~一’、~尹一~~~’J”均匀性好。目前研究得比较清楚的有铁氧体单晶薄膜和稀土一过渡金属薄膜。从制备工艺和性能稳定、器件开发等情况看，以铁氧体磁泡材料比较成熟，早期是用钙钦石型铁氧体单晶片来作磁泡材料，后为YIG单晶薄膜所取代。它是用液相外延法在Gd3Ga5OI:(简称GGO)基片上生成的单晶薄膜，其厚为微米量级。表4为稀土石榴石R3FesolZ的磁性;表5为一些磁泡材料的基本特性数值。农4稀土石抽石R.Fe‘ol，的磁性┌───────────┬────┬────┬────┬────┬────┬────┬────┬────┬─────┬────┬────┐│R │Y │Sm │EU │Gd │Tb │Dy │、Ho │Er │T】11 │Yb │Lu │├───────────┼────┼────┼────┼────┼────┼────┼────┼────┼─────┼────┼────┤│补偿温度，~p，K │ 560 │ 560 │ 570 │ 290 │ 246 │ 220 │ 136 │ 84│4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条