说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 高耐磨炭黑填充型粉末NR
1)  N330-filled powdered NR
高耐磨炭黑填充型粉末NR
1.
Study on N330-filled powdered NR (I) Powdering conditions and particle size distribution;
高耐磨炭黑填充型粉末NR研究 (I)粉末化条件与粒径分布
2)  carbon black filled powder NR
炭黑填充型粉末NR
1.
Dysprosium-modified carbon black filled powder NR[P(NR/HAF-Dy)] was prepared by liquid-phase chemical deposition and co-precipitation,and the kinetic models for the stages of scorch delay,curing and over-cure were proposed based on the curing curve of P(NR/HAF-Dy) compounds to describe the curing reactions of P(NR/HAF-Dy) compounds with different Dy addition level.
采用液相化学沉积法和凝聚共沉法制备稀土镝掺杂炭黑填充型粉末NR[P(NR/HAF-Dy)],在分析P(NR/HAF-Dy)硫化曲线的基础上,建立了不同稀土镝用量下胶料在硫化延迟阶段、硫化及硫化返原阶段的动力学模型。
3)  carbon black-filled powdered SBR
炭黑填充型粉末SBR
4)  carbon black filled powdered natural rubber
炭黑填充型粉末天然橡胶
1.
The mastication properties of carbon black filled powdered natural rubber during internal mixing;
炭黑填充型粉末天然橡胶的密炼机塑炼特性研究
5)  ultra-fine calcium carbonate-filled NR powder
超细碳酸钙填充型粉末NR
6)  HAF
高耐磨炭黑
1.
The rheological property of HAF filled powdered SBR [P(SBR/HAF)] with different addition levels of HAF and aromatic oil during mixing was investigated and compared to that of HAF filled bale SBR (SBR/HAF).
研究了高耐磨炭黑 (HAF)和芳烃油用量对HAF填充型粉末SBR[P(SBR/HAF) ]和块状SBR(SBR/HAF)胶料混炼流变性能的影响。
2.
Moreover,the comparative experiment of the rubber reinforced by CNTs with that by HAF was carried out.
研究了碳纳米管(CNTs)的加入对三元乙丙橡胶(EPDM)复合材料的力学性能和电性能的影响,将CNTs增强EPDM体系的力学性能与高耐磨炭黑(HAF)增强的体系进行了对比,并初步探讨了复合材料的结构。
补充资料:中超耐磨炭黑
 C    分子量12.01
    性质  黑色粉状物。平均粒径22-26nm。比表而积110-140m2/g。氧含量0.75-1.45%。氢含量0.20-0.32%。真密度1.78g/cm3
    生产方法  采用燃烧裂解法。即以防腐油、蒽油及二蒽憨油配入一定量的乙烯焦油为原料,经脱水、预热、雾化喷射到反应炉中,同时通入一定比例的煤气和空气,在1600℃左右进行不完全燃烧,再经裂解、冷却、分离收集、造粒、筛选、磁选而得。
    应用  主要作为填充剂,掺入天然橡胶、丁苯橡胶、丁基橡胶、异戊橡胶或顺丁橡胶中,从而可用于制造高级橡胶制品,如大型运韧带、传动带覆盖胶和耐磨胶辊等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条