说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 等效抗挤强度
1)  equivalent collapsing strength
等效抗挤强度
2)  collapsing strength
抗挤强度
1.
Influence of formation void on the collapsing strength of casing;
地层空隙对套管抗挤强度的影响
2.
Finite element ANSYS analysis method of bending casing collapsing strength
弯曲套管抗挤强度有限元ANSYS分析方法
3.
Collapsing Strength Analysis of Extra-heavy Wall Casing Under Nonuniform Loads
特厚壁套管在非均载荷下的抗挤强度分析
3)  collapse resistance
抗挤强度
1.
Non-uniform loading can reduce the collapse resistance of worn casings.
针对非均匀载荷下套管磨损后抗挤强度降低的问题,将磨损简化为套管的壁厚不均度和内壁不圆度几何缺陷。
2.
The effects of outer diameter/wall thickness,material yield strength,ovality,eccentricity and residual stress on the casing collapse resistance are analyzed in this paper.
为提高套管挤毁压力预测精度,应用统计方法对213根套管全尺寸挤毁试验数据进行了方差分析,研究了外径不圆度、壁厚不均度、残余应力等因素对套管抗挤强度的影响。
3.
Casing collapse resistance is a very active research field worldwide.
套管抗挤强度是国际上一个比较活跃的研究领域,多年来,API/ISO一直在组织国际合作研究。
4)  collapse strength
抗挤强度
1.
Method study on reliability analysis of casing collapse strength;
套管抗挤强度可靠性分析方法研究
2.
But the key factor of calculating casing collapse strength is wall thickness of expandable casing, which is concerned by the petroleum engineers.
管体膨胀后的壁厚是计算抗挤强度的关键要素,根据金属材料冷变形的原理,在对管柱膨胀进行力学分析的基础上,结合金属材料冷变形的体积不变原理,应用管子膨胀时的应力—应变关系推导出膨胀管壁厚变化的计算公式,同时编制了壁厚变化的计算软件。
3.
Then the collapse strength of the perforated casing under non-uniform load is numerically simulated.
并依其非均匀载荷下的大位移特征和强度特征,分别定义了临界载荷和等效抗挤强度
5)  equivalent bending strength
等效抗弯强度
1.
Theoretical models of equivalent bending strength of ternary boride cermet cladding material when the clad is under press condition are built based on the position of the maximum extension stress and that of the maximum press stress respectively.
分别基于最大拉应力点和最大压应力点建立了三元硼化物金属陶瓷硬质覆层材料覆层受压时的等效抗弯强度理论模型,并进行了实例和试验研究。
6)  equivalent aseismic strength
等效抗震强度
1.
The formulas of calculating the equivalent aseismic strength of the reinforced masonry subjected to shear force by three levels are resented.
根据40片无筋及水平配筋砖墙的试验资料,对水平配筋砖砌体各个阶段的刚度及变形能力进行了分析和探讨,提出了按常遇地震、基本烈度和罕遇地震三个水准的水平配筋砖墙的等效抗震强度验算公式。
补充资料:Z向抗张强度
分子式:
CAS号:

性质:纸产品属于三度结构材料,除了纵、横向强度之外,垂直于纸平面的强度也很重要。内结合强度系指在特定条件下,使单位面积的纸或纸板发生内部脱层所需要的力,以N/cm2表示。也称Z-向抗张强度。内结合强度主要决定于纤维间结合强度,受纤维长度和纤维本身强度的影响小,但受打浆、抄纸、湿压榨、造纸添加剂和纸页中细小纤维含量等的影响很大。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条