说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 预紧环
1)  Shrink ring
预紧环
2)  pre-tightening
预紧
1.
A new method of pre-tightening by means of drilling and heating for the king diameter coupling bolt was introduced.
介绍了一种在大直径联接螺栓中心钻孔,通过加热对螺栓进行预紧的新方法。
2.
The appropriate pre-tightening of the composite housing can ensure steady operation and high machining precision of machine tools.
组合式机架适当的预紧对保证机床的稳定运行和高精度的加工要求十分重要。
3)  pretension [英][prɪ'tenʃn]  [美][prɪ'tɛnʃən]
预紧
1.
This article has described the structure and function of the prestressing frame for the extruder and a pretension mode-the overheating steam heating pretension method,meanwhile by the applied examples the calculation of the pole elongation and the prestressing have been presented as well.
阐述了挤压机预应力框架的结构及作用,介绍了一种挤压机框架的预紧方式———过热蒸汽加热预紧法,并通过应用实例给出了拉杆伸长量和预紧力的确定方法。
4)  preloading
预紧
1.
Optimizing the preloading parameters of assembled framework hydraulic press;
压机组合框架结构的预紧参数优化
2.
On the coupling and preloading of the bolts in cranes;
螺栓在起重机械中的连接及预紧
3.
Formulas are derived to calculate axial rigidity,radial rigidity and friction moment of preloading paired bearings with rigidity errors analyzed.
对配对角接触轴承刚度和摩擦力矩进行了分析,推导出配对预紧轴承的轴向、径向刚度和摩擦力矩公式,并对刚度误差进行了分析,以A型轴承为例,对推导出的计算公式进行了验证。
5)  preload ['pri:'ləud]
预紧
1.
The new\|developed on\|line preload controller of spindle bearing on precision machine\|tool is designed for the spindle system of the FL\|1000 precision grinding machine.
以 FL- 10 0 0型精密磨床主轴系统为对象 ,设计了一种精密机床主轴轴承预紧力实时控制系统 。
2.
The axial fixed position preload is applied to middle ring of the shaft,the axial rigidity of the angular contact ball bearing is obtained by the impulse excitation tests.
对转台中环主轴施加轴向定位预紧力,通过脉冲激励法试验得到角接触球轴承的轴向刚度,试验结果与理论结果吻合较好,为转台研制中各轴系预紧量的控制提供了理论和实验依据。
3.
The types and working principle of preload of the angular contact ball bearings are introduced, the selection rules of the preload and calculation method of determining preload force are given.
介绍角接触球轴承预紧的类型及工作原理 ,给出了预紧选择原则和确定预紧力的计算方法。
6)  tightening ring
紧箍,紧环
补充资料:预紧式安全带
预紧式安全带的特点是当汽车发生碰撞事故的一瞬间,乘员尚未向前移动时它会首先拉紧织带,立即将乘员紧紧地绑在座椅上,然后锁止织带防止乘员身体前倾,有效保护乘员的安全。预紧式安全带中起主要作用的卷收器与普通安全带不同,除了普通卷收器的收放织带功能外,还具有当车速发生急剧变化时,能够在0.1s左右加强对乘员的约束力,因此它还有控制装置和预拉紧装置。

控制装置分有两种:一种是电子式控制装置,另一种是机械式控制装置。预拉紧装置则有多种形式,常见的预拉紧装置是一种爆燃式的,由气体引发剂、气体发生剂、导管、活塞、绳索和驱动

轮组成。当汽车受到碰撞时预拉紧装置受到激发后,密封导管内底部的气体引发剂立即自燃,引爆同一密封导管内的气体发生剂,气体发生剂立即产生大量气体膨胀,迫使活塞向上移动拉动绳索,绳索带动驱动轮旋转号驱动轮使卷收器卷筒转动,织带被卷在卷筒上,使织带被回拉。最后,卷收器会紧急锁止织带,固定乘员身体,防止身体前倾避免与方向盘、仪表板和玻璃窗相碰撞。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条