1) trimming
[英]['trɪmɪŋ] [美]['trɪmɪŋ]
修型
1.
This paper has theoretically derived from the math formula the quadric surface space of the straight profile annulus worm before and after the trimming, and detail explored and calculated the symmetry trimming of the straight profile annulus worm from the two aspects in order to increase the oil film surface on the teeth surface of the worm, which improves the drivability of the worm.
从理论上推导了直廓环面蜗杆修型前后的曲面空间数学表达式 ,并从两方面对直廓环面蜗杆的对称修型进行具体的探讨和计算 ,使蜗轮齿面的动压油膜面增加 ,蜗杆传动性能大为改善。
2) correction model
修正模型
1.
The current major application fields of satellite positioning some of tropospheric refraction correction model are introduced.
系统地分析对流层延迟特性在GPS导航中造成的定位误差,并主要介绍目前卫星定位领域主要应用的一些对流层折射修正模型。
2.
A new correction model for the target deviation is deduced when the optical axis is not parallel to the collimating axis, and the coordinates of the camera projection center in measuring coordinate systems are calculated in conditions of the mismatching between the optical center and the theodolite rotation center by using the object focus optical system as the projective center of camera system.
分析了目前采用的脱靶量修正模型的适用条件,采用坐标变换法推导出经纬仪脱靶量修正公式,获得了与球面三角学相一致的推导结果,并在此基础上推导出成像系统无照准轴平行约束条件的通用脱靶量合成公式。
3.
A profit distribution correction model for EPC engineering supply chain based on Shapley value was proposed which makes the profit distribution more reasonable.
针对EPC交钥匙工程,详细分析了shapley值法分配供应链利益的不足,综合考虑了诸多影响因素,提出了一个新的基于shapley值法的EPC工程建筑供应链合作企业的利益分配修正模型,使建筑供应链的利益分配更加合理。
3) model updating
模型修正
1.
Study on structure finite element model updating based on response surface methodology;
基于响应面方法的结构有限元模型修正研究进展
2.
Comparative research on methods of dynamic model updating of structure;
结构动力学模型修正方法比较研究
3.
Application of genetic algorithm on structural finite element model updating;
遗传算法在结构有限元模型修正中的应用
4) revise prototype
原型修正
5) maintenance model
维修模型
1.
Based on the aging and invalidation and external environment factors for equipment failures, which includes internal and external failures, and based on PH distribution, an equipment maintenance model is established.
根据造成装备故障的老化失效和外部环境因素,将装备故障分为内部故障和外部故障,综合考虑装备的完美修理和换件2种维修策略,基于PH分布对装备内外部故障过程的描述建立了装备的维修模型。
2.
Through analyzed,the paper has established procedure,method and example of maintenance models of average availability lose of plant,in which the nature and sensitivity of the output from the models are given by way of numerical examples.
考虑了设备具有多种状态(具有两种混合故障模式),两种故障模式均具有潜在故障特征,通过分析给出了建立设备平均可用度维修模型的程序、方法和示例。
3.
Based on comparison and analysis of the maintenance models for 4 types of bridge existing in the world, a new model for maintenance is proposed for analysis of comprehensive target reliability and maintenance cost and benefit.
以国际上已有的四种桥梁生命周期维修模型为基础,通过比较分析,提出了综合目标可靠度和维修成本效益分析的新维修模型。
6) truing model
修整模型
1.
Based on truing model of saucer diamond-grinding wheel with cup wheel, the influence of contact stiffness between saucer wheel and cup wheel on the stability of the grinding system and grinding force was discussed, as well as verifying of the signal characteristic and changing rule of grinding force.
在建立杯形砂轮修整碟形金刚石砂轮修整模型的基础上,分析了砂轮接触刚度对磨削系统稳定性和磨削力的影响。
补充资料：三修──胜三修
【三修──胜三修】
﹝出涅槃经﹞
谓菩萨依佛胜教而修，破于声闻劣修，故名胜三修。
［一、常修］，常即不迁不变之谓也。盖菩萨了知法身之体，本来常住，无灭无生，以破声闻之人，不应于诸法中执为无常，是名常修。
［二、乐修］，乐即安隐寂灭之谓也。盖菩萨了知诸法之中，而有涅槃寂灭之乐，以破声闻之人，不应于诸法中执之为苦，是名乐修。（梵语涅槃，华言灭度。）
［三、我修］，我即自在无碍之谓也。盖菩萨了知无我法中而有真我，得大自在，无有障碍，以破声闻之人，不应于诸法中执为无我、无我所，是名我修。（我所者，谓五阴之身及资生等物也。）
﹝出涅槃经﹞
谓菩萨依佛胜教而修，破于声闻劣修，故名胜三修。
［一、常修］，常即不迁不变之谓也。盖菩萨了知法身之体，本来常住，无灭无生，以破声闻之人，不应于诸法中执为无常，是名常修。
［二、乐修］，乐即安隐寂灭之谓也。盖菩萨了知诸法之中，而有涅槃寂灭之乐，以破声闻之人，不应于诸法中执之为苦，是名乐修。（梵语涅槃，华言灭度。）
［三、我修］，我即自在无碍之谓也。盖菩萨了知无我法中而有真我，得大自在，无有障碍，以破声闻之人，不应于诸法中执为无我、无我所，是名我修。（我所者，谓五阴之身及资生等物也。）
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条