说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 热送热装热过程
1)  hot transferring and charging process
热送热装热过程
2)  hot (red) sending process
热(红)送过程
3)  hot delivery and hot charging
热送热装
1.
The practice of hot delivery and hot charging of continuous casting billet in the Bar Plant of Tangshan Iron and Steel Corporation;
唐钢棒材厂连铸坯热送热装实践
2.
Hot delivery and hot charging technology of continuous casting slab includes two technologies: hot delivery and hot charging rolling,and direct charging rolling.
连铸坯热送热装工艺分为热送装炉轧制和直接装炉轧制两种。
3.
The high temperature and quick rolling technology was applied based on the hot delivery and hot charging process combining with regenerative reheating technique in Shaoguan Iron and Steel Co.
介绍了韶关钢铁股份有限公司三轧厂将连铸坯热送热装技术与蓄热式加热炉加热技术有机地结合,采用高温快轧工艺,不仅使企业实现了节能降耗,而且提高了生产率和产品质量。
4)  CC-HCR
热装热送
1.
APPLICATION OF CC-HCR TECHNIQUE ON ENGINEERING DESIGN OF HOT-ROLLED STRIP;
连铸坯热装热送在热带工程设计中的应用
2.
The paper simulated and resolved the temperature grads change of the casting billet by computer in the course of the CC-HCR the research object is the continuous square casting billet in the CC-HCR of bar in Tang Shan Iron and Steel Group.
以唐钢棒材厂现有热装热送工艺中的连铸方坯为研究对象,考虑了带与不带保温罩两种热送条件,结合辐射和对流的复合边界条件,对铸坯在热送过程中的温度梯度的变化进行了计算机模拟与解析,所得结果与实测符合得较好。
5)  hot charging
热送热装
1.
By using SEM,TEM,EDX and quantitative analysis of precipitates,and simulating the hot charge rolling of Nb-V-Ti-Mo series low carbon microalloy steel in laboratory,the solution and precipitation of microallyed elements during rolling had been investigated at hot charging temperature 750 ℃ and 1100 ℃,respectively.
运用SEM、TEM、EDX及析出物定量分析等方法,通过实验室模拟热送热装工艺,研究了X80管线钢坯分别在750℃和1100℃热装轧制时微合金元素的固溶和析出情况。
2.
This paper introduces the change of microstructure and properties of the rolled rail steel of CC bloom in hot charging.
文章主要介绍了采用钢轨钢连铸坯热送热装工艺生产钢轨组织的变化和所能达到的各项性能指标。
3.
The results of energy saveing and increase of productivity with hot charging of continuous cast slabs at Maanshan Iron & Steel Co.
介绍了马钢实施热送热装以来在节能、增产方面所取得的成效,以及马钢第三炼钢厂连铸坯热送热装 工艺,并提出几点建议。
6)  HCR/DHCR
热送热装
1.
concept and technology of load oriented production mission put in is analyzed, Based on slab inventory analysis about cenain rolling mill, calculation method of slab inventory is brought forward and reasonable inventory quantity is calculated for this mill, inventory in different HCR/DHCR condition is analyzed, theory gist is given for steel enterprise to deduce slab inv.
基于对某钢厂热轧板坯库库存解析,提出了计算库存的方法并计算了该厂的合理库存,分析了各种热送热装方式的库存容量,为钢铁企业降低在制品库存提出了理论依据。
补充资料:圣若热城堡
      葡萄牙著名历史城堡。位于里斯本东南部面临大西洋岸边的山崖上。城堡居高临下,三面峭壁,十分险要。建于公元12世纪。罗马军队占领该地后将其改建为罗马式城堡。摩尔人入侵后,又改筑成摩尔式城堡。城堡采用摩尔人的建造方法,全部用石块筑成,有胸墙,并用步廊连接,具有实战意义。1147年莱昂国王阿丰索一世夺取里斯本,建立葡萄牙王国后,加固了城堡,使其成为保卫里斯本的重要要塞。后为纪念1386年在攻占里斯本战役中与英国结成的联盟,将城堡命名为"圣若热城堡"。城堡十分坚固,炮台上仍放置有当年使用的大炮。城堡内设一巨型斜台,镶嵌着巨幅里斯本瓷砖风景画。城堡内还设有动物园和植物园。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条