说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 铸造AlSiCuMg合金
1)  AlSiCuMg cast alloy
铸造AlSiCuMg合金
2)  AlSiCuMg alloy
AlSiCuMg合金
3)  Cast Alloy
铸造合金
1.
On the basis of orthogonal experiment, the effect of Mg content and heat treatment on mechanical properties of near eutectic Al Si cast alloys modified with Sr has been investigated.
以正交试验为基础 ,通过调整Mg含量和热处理工艺 ,分析它们对Sr变质近共晶Al Si铸造合金力学性能的影响。
2.
The effect of carbon content on element segregation and corrosion resistance of the cast alloy Fe 30Ni 20Cr 6Mo has been investigated.
研究了Fe-30Ni-20Cr-6Mo铸造合金中微量元素C对合金元素偏析和耐蚀性的影响。
3.
Effect of microstructure and element distribution of an iron base cast alloy Cr30Nil7Mo2Cu solidified at different rates upon the erosion-corrosion behaviour in flowing suspension of solid particles in strong acidic medium has been investigated by metallograph, XRD, EPMA and hardness tests.
用扫描电镜、X射线衍射、电子探针等手段测定及分析了Fe基铸造合金Cr30Ni17Mo2Cu以不同速度凝固后的显微组织和主要合金元素分布,在含固相颗粒的强酸性双相流介质中测定了冲刷腐蚀性能。
4)  Cast alloys
铸造合金
5)  casting alloy
铸造合金
1.
A new type of multi-function system for testing linear shrinkage, stress and hot cracking of casting alloy is introduced in the paper.
介绍一种新型铸造合金线收缩-应力-热裂特性综合测试系统。
2.
Transformation of the microstructure and the hardness of Gx180CrWV-20 casting alloys during different heat treatments were studied and analyzed.
研究了Gx180CrWV 20铸造合金在不同热处理条件下组织结构和硬度的变化以及热处理温度和磨损试验温度对其高温磨损性能的影响。
3.
To test solidification characteristics of various casting alloy accurately is very significant for optimizing casting technique and getting castings with sound property and appropriate dimensions.
精确测定不同铸造合金的凝固特性对于优化铸造工艺、获得满足性能和尺寸要求的铸件具有十分重要的意义。
6)  casting aluminum alloy
铸造铝合金
1.
This paper discusses the molybdenum blue spectrophotometer method to determine high silicon content in casting aluminum alloys by reducing the quantity of samples and relative silicon content.
探讨了铸造铝合金中高硅的钼蓝光度分析方法,通过采取减少试样引入量、减少硅的相对含量等方式,使 方法得以适用;提出了方法的最佳分析条件,从而使分析的结果在国家标准的误差范围之内。
2.
The effects of solid solution treatment and ageing on the mechanical properties and corrosion resistance of a new corrosion resistant casting aluminum alloy were introduced.
主要介绍了不同的固溶和时效处理制度对新型耐蚀铸造铝合金力学性能、耐蚀性能的影响 ,通过对金相组织观 察和能谱分析 ,结合相图进行了讨论 ,指出 Mg2 Si相的充分固溶和均匀析出是决定 Al- 2 Mg- 3Si合金综合性能的关键因素 ,并根据材料实际应用情况最终确定了该新型耐蚀铸铝的热处理制度。
3.
Through the improvement of traditional coloring technologies, a coloring technology for casting aluminum alloy to obtain a reddish brown color film was developed.
研究了着色液中 Cu Cl2 含量、着色时间等因素对铸造铝合金 ZL 1 0 5表面着赭红色效果的影响 ,并考察了膜的耐腐蚀性能。
补充资料:铸造:铸造有色合金

用以浇注铸件的有色合金(见有色金属)﹐是铸造合金中的一类。主要有铸造铜合金﹑铸造铝合金﹑铸造镁合金和铸造鈦合金等。
         铸造铜合金 分为铸造锡青铜﹑铸造铅青铜﹑铸造铝青铜和铸造黄铜等。①铸造锡青铜﹕即铜锡合金。它的性能不太令人满意﹐而且锡比较贵﹐所以往往用其他元素如锌﹑铅和磷等代替部分锡。这类合金耐磨耐蚀性能好﹐常用以製造蒸汽及水的阀门﹑轴承﹑齿轮和衬套等零件。②铸造铅青铜﹕以铜锡合金为基加入10~25%的铅。铅几乎不溶於锡青铜﹐以纯铅状态分布在合金中﹐起改善合金的切削性和耐磨性的作用。这种铸造合金可用以製造耐蚀﹑耐磨﹑切削性能好的零件或轴套。③铸造铝青铜﹕以铝为主要合金元素的铜基合金﹐一般含铝8.5~10.5%﹐具有良好的机械性能﹑耐蚀和耐磨性能﹐是各种青铜中应用最广的一种﹐用於製造机械工业中的轴套﹑齿轮﹑蜗杆及电器设备等零件。④铸造黄铜﹕以锌为主要合金元素的铜基合金﹐为提高强度加入锰﹑硅﹑铝等元素﹐分别称为锰黄铜﹑硅黄铜﹑铝黄铜。黄铜多用於船舶﹑汽车﹑拖拉机及仪錶上的零件(见铜合金)。
         铸造铝合金 分为铝硅系﹑铝铜系和铝镁系 3种。①铸造铝硅系合金﹕以硅为主要合金元素的铝基合金﹐即硅铝明。这类合金具有优良的铸造工艺性和气密性﹐可通过变质处理来提高强度﹐适合常温下使用﹐可铸造形状复杂的铸件﹐应用普遍。②铸造铝铜系合金﹕以铜为主要合金元素的铝基合金﹐一般含铜4~12%﹐有较高的热强度﹐适合在较高温度下工作。但这类合金铸造性能和抗蚀性较差﹐一般用於製造空冷低动力发动机气缸头﹑气缸活塞等铸件。③铸造铝镁系合金﹕以镁为主要合金元素的铝基合金﹐一般含镁3~10%﹐属於高强和高抗蚀性合金﹐具有良好的切削性能﹐在造船工业和食品﹑化工部门应用较多。它的缺点是耐热和铸造性差。
         铸造镁合金 以镁为基的合金(见镁合金)﹐具有较高的比强度和比刚度﹐减震性好﹐并有优良的切削性能。用於航空工业﹑仪器﹑无线电技术和运输工业等方面的零部件。
         铸造鈦合金 以鈦为基的合金(见鈦合金)﹐有比铸造铝合金更高的比强度﹑优良的抗蚀性和耐热性﹐但熔点高﹐化学性十分活泼﹐製造工艺复杂。铸造鈦合金是航空和航天工业中不可缺少的结构材料﹐也用於造船﹑化工﹑冶金﹑医疗等方面的零部件。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条