1) porous media
含水率分布
1.
Drying process of water in porous media was studied by visualization method.
并利用实验拍摄的数字图像进行分析和含水率计算,提出干燥过程中含水率分布图像化的方法,并讨论了将此图像化方法应用于含水多孔介质体干燥的可行性。
2) instantaneous distribution of water content
瞬态含水率分布
3) water-cut
含水
1.
Cause of low water-cut oil layer in Yanqi Basin and the interpretation method;
焉耆盆地低含水油层产生原因及解释方法探讨
2.
As for the decline regularity of the individual well, water-cut property during production, and pressure variation in the block, analysis and evaluation are carried out, and stimulation and stable production measures are given.
针对区块单井递减规律、生产含水特征、区块压力变化等开展分析与评价工作,提出了合理的增产、稳产措施。
4) containing water
含水
1.
Through using the surface active agent,dispersing the water into the low melt point paraffin,based on the weight ratio of water,low melt point paraffin,epoxy resin is 5∶20∶80,the containing water phase change material was yielded.
含水型相变材料具有很大的储热效能,本实验通过采用表面活性剂将水分散于低熔点石蜡中,按照水、低熔点石蜡、树脂基体质量比为5∶20∶80配比制得含水型树脂基定形相变材料。
2.
The reasons of containing water in solvent in ketone-benzol dewaxing unit and the disadvantageous influence are introduced.
介绍了酮苯脱蜡装置溶剂含水原因及对生产过程的不利影响。
3.
Process of containing water disposal of the finished product 876- 1 UP resin is studied in this paper, the process method of containing water 876 - 1 resin disposal is groped through experiment ,The experience and the sowing base are provided for other sing finished products UP resin when the similar question accidentally appear.
本文以含水876—1不饱和聚酯树脂为例,探讨了含水876-1树脂处理的工艺方法,为其它不饱和聚酯树脂出现的类似问题提供了解决的依据。
5) water cut
含水
1.
According to the research on the changing rules of the minimum load for the rod pumped wells with the change of water cut and submergence depth and the rubbing wear rules for the rods and tubing,the effect of water cut and submergence depth on the eccentric wear of rods and tubing has been understood.
通过对抽油机井最小载荷随含水和沉没度变化规律及杆管摩擦磨损规律的实验研究,找出了含水、沉没度对杆管偏磨的影响规律。
2.
Bottom water coning is an important factor affecting reservoir development effect, causing earlier water breakthrough, rapid water cut increase and production decrease.
底水锥进常常使油井过早见水、含水上升迅速、产量递减加快。
3.
In consideration of the situations of unstable sampling, less parameters of measurement in water cut detection in traditional sampling logging tool and the effect of flow rate on water cut detection, by 7 parameter combination logging tool is developed for remote detection, water cut is detected with a sampling capacitance.
针对传统的取样式测井仪在测含水的过程中取样不可靠、测量参数少,过流式测井仪测量含水受流量影响的现状,研制开发了一种取样式电容法测含水的遥测七参数组合测井仪。
6) water content
含水
1.
In view of the practical condition of oilfields, it is proposed to measure water content and storage in oil tanks by the use of the gravitational method, which can achieve real-time monitoring of such parameters as water content and storage of processed oil tanks in oilfields.
结合油田实际,提出了一种利用重力法测量油罐含水和罐存的方法,这种方法能够实时地监测油田成品油罐的含水、罐存等参数状态,方便管理,适应油田生产的需要。
2.
In view of the difficulty of dehydrating of crude oil in the extra high water content stage,the three three-phase separators in Gudong oil production plant of Shengli Oilfied were reformed by Lanzhou Petroleum Machinery Research Institute with patent of America CE-NATCO.
针对稠油区块特高含水期原油脱水的难题,兰州石油机械研究所利用引进消化的美国CE-NATCO公司专利技术,对中国石油化工集团胜利油田分公司孤东采油厂4#联合站3台老式三相分离器进行了改造,经过一段时间的调试和运行,取得了较好的效果。
参考词条
补充资料：含水率
见回潮率。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。