1) Al2O3/Ni nanocermets
Al2O3/Ni纳米金属陶瓷
1.
Al2O3/Ni nanocermets were prepared by the heterogeneous precipitation method and hot-pressing technique.
采用非均相沉淀法和热压工艺制备了Al2O3/Ni纳米金属陶瓷。
2) Al2O3/Ni cermet
Al2O3/Ni金属陶瓷
1.
Al2O3/Ni cermet were prepared by hot pressing,and the relationship between their microstructure,mechanical and dielectric properties with Ni particle content were investigated.
以热压烧结的方法制备了Al2O3/Ni金属陶瓷,探讨了Al2O3/Ni金属陶瓷显微结构、力学性能及微波介电性能随Ni粒子含量变化的规律。
2.
Ni coated α-Al2O3 composite microspheres are first synthesized by heterogeneous precipitation coating method, and then Al2O3/Ni cermets are prepared by hot press-sintering of the as-prepared Ni-coated α-Al2O3 powders.
首先采用非均相沉淀包裹法制备金属镍包裹α-Al2O3复合微球粉体,然后采用热压烧结制备了Al2O3/Ni金属陶瓷。
3) nano-Al2O3 ceramics
纳米Al2O3陶瓷
4) nanocermet
纳米金属陶瓷
1.
Study on preparation of nanocermet Ni-AlN composite layer with method of ultrasonic-electrodepositing;
纳米金属陶瓷Ni-AlN复合层的超声-电沉积制备
2.
Based on the action of ultrasonic-electrodepositing,the technique of preparating nanocermet(Ni-SiC) composite layer on the surface of metal substrates was studied.
基于超声电沉积复合作用,研究在金属表面获得纳米金属陶瓷复合镀层的基本工艺。
5) Ni-nano Al2O3
Ni-纳米Al2O3
6) nano-powder reinforcing cermets
纳米增强金属陶瓷
1.
Microstructural characteristics and thermal shock resistance of nano-powder reinforcing cermets;
纳米增强金属陶瓷的组织及热冲击性能
补充资料：含二氧化硅金属陶瓷
分子式：
CAS号：
性质：由二氧化硅陶瓷和金属或合金组成的复合材料。二氧化硅呈颗粒状，粒度200目，通常还加人体积含量为2%～7%的氧化铝，基体金属通常由铜、锌、锡、铅、铁等组成，同时加入弥散的石墨为润滑剂。采用粉末冶金技术制造。主要用作离合器和刹车装置等的摩擦材料。
CAS号：
性质：由二氧化硅陶瓷和金属或合金组成的复合材料。二氧化硅呈颗粒状，粒度200目，通常还加人体积含量为2%～7%的氧化铝，基体金属通常由铜、锌、锡、铅、铁等组成，同时加入弥散的石墨为润滑剂。采用粉末冶金技术制造。主要用作离合器和刹车装置等的摩擦材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条