说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 树脂固化仪
1)  resin curemeter
树脂固化仪
1.
In recent years, the resin curemeter has been improved into fully-automatic controlling Model LHX-Ⅱ, and used to study the cure of thermosetting resin/montmorillonite nanocomposites, PMMA/montmorillonite nanocomposites and interpenetrating polymer networks.
 用计算机全自动控制的LHX Ⅱ型树脂固化仪对热固性树脂基蒙脱土纳米复合材料、热塑性树脂PMMA基蒙脱土纳米复合材料以及聚合物互穿网络等体系进行了固化反应的研究。
2)  resin solidification
树脂固化
3)  immobilized resin
固定化树脂
1.
A assay method of immobilized resin was set up by testing the particle size and strength of resin, immobilizing, and testing stabilization of the immobilized enzyme, and some problems of resin in application in recent three years' resin screening work were summarized.
从树脂粒度、树脂强度、固定化、稳定性检测方面着手,建立了一套树脂评估方法并总结了树脂检测中常见的问题,希望有助于树脂生产企业加快固定化树脂的国产化进程。
4)  photosensitive resin
光固化树脂
1.
This paper firstly studied the bonding mechanism of the photosensitive resin blade,and then introduced the effective measures to improve the quality for photosensitive resin blade by means of the metal-coated diamond abrasive and studied the change of bonding ability of the blade compared with conventional abrasive.
探讨了光固化树脂磨具不同于普通树脂磨具的结合机理,并在该理论的基础上寻找出改善磨具结合性能的措施。
2.
Diamond abrasives(4~8μm girt size)are bonded quickly by photosensitive resin and then exposed under 300~500 nm wavelength ultraviolet ray to fabricate fixed abrasive plate.
采用4~8μm粒径的金刚石微粉作为磨料,以光固化树脂作为结合剂,在300~500 nm波长紫外线照射下,使光固化树脂快速固化,制作固着磨料研磨盘(金刚石浓度100%),以φ5 mm氮化硅陶瓷球为加工对象,在自行设计的实验台上进行了加工实验。
5)  Photocurable Resin
光固化树脂
1.
Radical, cationic and hybrid photocurable resins used for stereolithography(SL) are introduced.
介绍了用于立体光造型技术的自由基型、阳离子型及混杂型树脂体系 ,阐述了它们各自的优缺点 ,展望了立体光造型法用光固化树脂的研究前景和发展趋
2.
A series of photocurable resins used for SL are prepared.
设计了多种用于立体光造型 (SL)法的光固化树脂配方 ,对影响其体收缩和线收缩的几种因素进行了研究 。
6)  photocuring resin
光固化树脂
1.
The principle on stereolithography,laser source,photocuring resin and photo-initiator were reviewed.
简要介绍了快速制造技术 ,阐述了光固化成型原理 ,激光光源及所用光固化树脂。
2.
The photocuring resin for Laser Rapid Prototyping & Manufacture was prepared,the shrinkage reasons of photocuring resin was analyzed,and the effect of the photocuring resin shrinkage on parts curl distortion was studied.
制备了激光快速成型用光固化树脂 ,分析了光固化树脂收缩的原因 ,研究了光固化树脂的收缩行为对成型零件翘曲和变形的影响 ,从树脂本身微观分子结构和引起翘曲的机理方面来解释零件的变形行为 ,并且提出了从树脂和扫描工艺两个方面进行改
补充资料:胺固化环氧树脂涂料
分子式:
CAS号:

性质:是一类常温固化的环氧树脂漆,固化剂主要是多元胺、胺加成物和聚酰胺树脂等,大多挥发有毒。漆的固化同环氧树脂的环氧基和胺固化剂的活泼氢原子常温交联完成。通常分为以下几类。(1)多元胺固化环氧树脂漆,常用固化剂为乙二胺、二亚乙基三胺。该漆为双组分,施工前配混,使用期限短,固化剂在毒,施工不太方便,对脂肪烃类溶剂、稀酸、碱和盐有优良的耐腐蚀性。主要用于涂装既要求防腐蚀有不能烘烤的大型设备,如油罐和贮槽内壁、地下管道等。(2)胺加成物固化环氧树脂漆,以多元胺加成物为固化剂,常用的多元胺加成物有丁基缩水甘油醚-二亚乙基三胺加成物和环氧树脂-乙二胺(或已二胺、二亚乙基三胺)加成物。此类漆漆膜不易泛白,臭味较小,配漆后可不经静置熟化而直接使用。其用途与多元胺固化环氧树脂漆相同。(3)聚酰胺固化环氧树脂漆,以氨基聚酰胺树脂为固化剂。此类漆特点为:对金属和非金属粘接力强,可制得弹性好的漆膜;耐候性较好;双组分包装,使用期较长;施工性好,可在除锈不充分或较潮湿的钢铁表面施工;可制成水下施工涂料。因漆膜弹性好,可用于涂装金属薄板、塑料薄膜、橡胶制品等,常用于涂装贮罐、煤仓、地板、管道、钻塔、石油化工设备、海上采油设备等。(4)胺固化环氧沥青漆,以脂胺类或低分子量聚酰胺树脂作固化剂的环氧煤焦沥青涂料。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条