1) coaxial nozzle
同轴送粉喷嘴
1.
A novel coaxial nozzle used in laser cladding is designed and trialproduced.
为了克服目前用于激光熔敷的侧向送粉的不足,设计并试制了激光熔敷加工中使用的同轴送粉喷嘴。
2) feeeding nozzle
送粉喷嘴
3) coaxial nozzle
同轴喷嘴
1.
Coupling of supercritical CO_2 extraction and coaxial nozzle spray drying to prepare zanthoxylum oil microcapsule;
超临界CO_2萃取与同轴喷嘴耦合制备花椒油微胶囊
2.
Zanthoxylum oil is extracted with supercritical CO_2 and encapsulated by spray drying(using a coaxial nozzle).
研究了超临界CO2萃取花椒油,并直接采用同轴喷嘴喷雾干燥制备微胶囊。
4) coaxial powder-feed
同轴送粉
1.
Research on coaxial powder-feed using Laser engineered net shaping;
激光工程化净成形同轴送粉的研究
2.
The composition and principle of the Laser Engineered Net Shaping (LENS) system coaxial powder-feed equipment was introduced.
介绍了激光工程化净成形系统同轴送粉器组成和工作原理 ;通过试验分析可知 ,粉末送给量与步进电机转速成正比 ,加工层厚与粉末送给量成正比 ;激光焦点与喷粉焦点不重合是造成成形件侧表面粗糙、堆积高度波动、截面厚度不均匀和尺寸误差的直接原因 ,调整激光焦点位置使激光焦点与喷粉焦点重合可有效解决上述问
5) co-axial feeding
同轴送粉
1.
High-convergent co-axial feeding nozzle is the core of laser rapid manufacturing.
高汇聚同轴送粉喷嘴是激光快速制造的核心装置之一 ,同轴送粉喷嘴最基本的功能应该包括通光与粉末的均匀汇聚 ,粉末汇聚程度越高 ,则粉末利用率越高、制造精度越高。
6) coaxial powder feeding
同轴送粉
1.
Ni-based spontaneous melting alloy powder and Co - based spontaneous melting alloy powder are selected for laser cladding on the mild steel substrate with the fore-put powder and the coaxial powder feeding respectively.
选用Ni基自熔合金粉末和Co基自熔合金粉末,在低碳钢基材上分别进行预置粉末和同轴送粉激光熔覆试验。
2.
According to the disadvantages of the powder lateral feeding and coaxial powder feeding outside the laser about laser cladding rapid prototyping,This article introduce the course of reciprocity between laser and alloy powder.
针对目前激光熔覆快速成形所采用的单粉管光外侧向送粉和多粉管光外侧向同轴送粉两种方式的不足,介绍了光内同轴送粉工艺下的激光束与粉末相互作用过程。
补充资料：送陆太祝赴湖南幕同用送字
【诗文】：
不惮征路遥，定缘宾礼重。新知折柳赠，旧侣乘篮送。
此去佳句多，枫江接云梦。
【注释】：
【出处】：
全唐诗：卷324-32
不惮征路遥，定缘宾礼重。新知折柳赠，旧侣乘篮送。
此去佳句多，枫江接云梦。
【注释】：
【出处】：
全唐诗：卷324-32
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条