2) process design
工艺设计
1.
Process design of vent gas of concentration tower;
浓缩塔放空气的工艺设计
2.
Discussion on process design for sludge anaerobic digestion;
污泥厌氧消化工艺设计探讨
3) technological design
工艺设计
1.
Downhole choke technological design method for high pressure well;
基于耦合模型的高压气井井下节流工艺设计方法研究
2.
Treatment method of vanillines wastewater and technological design;
香兰素废水处理技术研究及工艺设计
3.
Special requirements for LNG vaporizing station technological design in low temperature conditions;
低温条件下LNG气化站工艺设计的特殊要求
4) technology design
工艺设计
1.
On the method of reducing broken rice in technology design;
浅论工艺设计中减少碎米产生的方法
2.
The principle and operating procedure of AOD were lntroduced,and then the device and technology design features of the AOD convertor system,supply and distribution system,alloy charging system,the dedusting system combined with the stainless steel technological process were summarized.
简要分析了AOD的工作原理、工艺操作过程;并结合AOD工艺操作特点,总结了AOD炉体设备、供配气系统、铁合金及副原料加料系统、烟气净化系统等相关设施的设备设计特点以及工艺设计特点。
3.
The technology design and analysis of separating box were discussed,which had the profound instruction to the similar product processing.
本文通过带冷机柔性传动箱体的结构特点及使用性能的分析,并据设备能力设计了切实可行的工艺方案,先面后孔,立车与镗床相结合完成孔系加工,重点论述了分离式箱体的工艺设计和分析,对同类产品的加工具有深远的指导意义。
5) technical design
工艺设计
1.
The technical design about complete lifting and mounting of superstructure in 53000 DWT bulk carrier
53000DWT散货船上层建筑整体吊装工艺设计
2.
Study on the technical design and simulation of warp knitted broché fabric
浮纹型贾卡经编针织物的工艺设计与仿真
3.
The technical design of the machinery electricity includes the designs of collectivity configuring of electricity, electrical tanks, button stations and non-standard accessory drawings, and the designs and protracts of the machinery electrical interconnection, location drawings of accessories, wiring diagrams, etc.
机床电气工艺设计包括电器总体配置、电柜、按钮站及非标准零件图的设计,以及床身电器互联图、各部件器件位置图、接线图的设计与绘制等工作。
6) process planning
工艺设计
1.
Intelligent process planning and quality prediction for textiles;
纺织品智能工艺设计与质量预测系统
2.
Research on Process Planning about Shaft Parts of Aeroengine Based on Typical Process;
基于典型工艺的航空发动机轴类零件工艺设计方法研究
3.
Core process skeleton based process planning during the early stage of product development;
产品开发早期基于核心工艺框架的工艺设计
补充资料：新工艺、新方法研制
新工艺、新方法研制：对新工艺、新方法的研制或对现有工艺、生产过程的技术上的实质性的改进，属于研究与发展活动。采用国内已有的生产工艺或生产过程，而在技术上没有实质性的改进，只是对采用的生产工艺或生产过程作适应性的试验，不属于研究与发展活动，而是研究与发展成果应用活动。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条